Evaporator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- E
- Eng. Desg.
- -
Showing parts 1 to 22 out of 22.
1054804
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 9-1/2 in.
- Width
- 10-9/16 in.
- Thickness
- 3-9/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 9/16 in. OD
- Outlet
- 13/16 in. OD
- Pop. Code
- D
Evaporator
7-3056
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 21-9/16 In.
- Width
- 20-3/8 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
93009
Replaces Aluminum And Copper/Brass Heater; Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-7/8 in.
- Width
- 6-5/8 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heater
93045
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-5/8 in.
- Width
- 6 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-507
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU2342
Hoist May Be Required for Radiator Installation Underneath the Vehicle
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 21-1/4 In.
- Width
- 23-1/8 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 24-1/8 In. x 2-3/8 In.
- Outlet Header
- 24-1/8 In. x 2-3/8 In.
- Inlet
- 1-9/16 In.
- Outlet
- 1-9/16 In.
- Pop. Code
- C
Automotive Radiator
Fuel Pump Driver Module 
FN840
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 35-1/2 in.
- Vent 1
- 3/8 in.
- Vent Quantity
- 1
- Pop. Code
- B
Filler Neck
FNH159
Part Specifications
- Overall Length
- 14 in.
- End 1 Inner Diameter
- 1-3/8 in.
- End 1 Outer Diameter
- 1-11/16 in.
- End 2 Inner Diameter
- 1-1/4 in.
- End 2 Outer Diameter
- 1-9/16 in.
- Pop. Code
- C
Filler Neck Hose
FP42A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 2.5 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.8
- Pop. Code
- B
Oil Pan
LO180
Part Specifications
- Material
- Plastic / Polymer
- Outside Diameter
- 6-1/2 in.
- Inside Diameter
- 6-1/16 in.
- Pop. Code
- C
Lock Ring
LO186
Part Specifications
- Material
- Polymer
- Outside Diameter
- 3/16 in.
- Inside Diameter
- 5-1/4 in.
- Pop. Code
- A
Lock Ring
MA147
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 6
- Pop. Code
- A
Mass Airflow Sensor
MA160
Sensor Module with Housing
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Spade
- Terminal Count
- 6
- Pop. Code
- A
Mass Airflow Sensor
OS5037
Position: Downstream Right; Qty Req.: 1 OR Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 17-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5041
Position: Upstream Right; Qty Req.: 1 OR Position: Upstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 19-5/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10105
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
SP2075M
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Flex / Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 80-116 psi
- Flow Rate
- 59-69 gph
- Resistance
- 7-138 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included
- Pop. Code
- B
Fuel Module 
Strap
Strainer 
TB1014
Heated Style (with pipe); Non-Heated Style (without pipe); Bypass Of Heater Connection Required; Refer To Service Bulletin
Part Specifications
- Length
- 8-9/16 In.
- Width
- 3-9/16 In.
- Connector
- 4 Pin Male
- Inside Diameter
- 2-9/16 In. (65 mm)
- Pop. Code
- A
Electronic Throttle Body
