Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- 2GR-FSE
Showing parts 1 to 16 out of 16.
Evaporator
7-3490
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 25-9/16 In.
- Width
- 14-1/8 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- B
Condenser
98132
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 4-1/16 in.
- Width
- 10-3/16 in.
- Thickness
- 1 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- D
Heater
C-710
Ignition Coil Mounts to Cylinder Head; Qty Req.: 6
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
FI1518
To 09/2009
Part Specifications
- Description
- Fuel Injection Pump
- Fuel Type
- Gas
- Inlet
- 1/4
- Inlet Type
- Threaded
- Outlet
- M14-1.5
- Outlet Type
- Threaded
- Pop. Code
- W
Fuel Injection Pump 
MA175
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 5
- Pop. Code
- C
Mass Airflow Sensor
OS5119
Drive Type: AWD; Bank 2 Sensor 2; Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 45-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5482
Bank 1 Sensor 1; w/ 4 Wires; Position: Upstream Right; Qty Req.: 1 OR Bank 2 Sensor 1; w/ 4 Wires; Position: Upstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- AFR
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 12-5/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS6172
Drive Type: RWD; Bank 2 Sensor 2; Position: Downstream Left; Qty Req.: 1 OR Bank 1 Sensor 2; Position: Downstream Right; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- THIMBLE
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 24-13/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10224
Position: Exhaust (Right); Qty Req.: 1 OR Position: Center Left; Qty Req.: 1
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 3
- Terminal Shape
- Pin
- Pop. Code
- A
Camshaft Position Sensor
S10419
Position: Left Lower; Qty Req.: 1
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
TB1126
Part Specifications
- Length
- 5-9/16 In.
- Width
- 4-7/8 In.
- Connector
- 6 Pin Male
- Inside Diameter
- 2-3/4 In. (70 mm)
- Pop. Code
- D
Electronic Throttle Body
TOP35A
Drive Type: RWD; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 1.6875 in
- Drain Plug Thread
- M12 X 1.5
- Liter
- 5.9
- Pop. Code
- C
Oil Pan
TOP36A
Drive Type: AWD; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 1.125 in
- Drain Plug Thread
- M12 X 1.25
- Liter
- 5.9
- Pop. Code
- B
Oil Pan
TOP74A
Drive Type: RWD; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Upper; Qty Req.: 1
Part Specifications
- Material
- Aluminum
- Height
- 4.1875 in
- Liter
- 6.4
- Pop. Code
- D
Oil Pan
