ou
                            
Résultats de recherche
- Essence
 - GAS
 - Alimentation d’essence
 - FI
 - ASP.
 - N
 - NIV moteur
 - -
 - Désignation moteur
 - 4GR-FSE
 
        Pièces 1 à 20 sur 20.    
            7-3523
with Receiver Drier
                                                Spécifications
- Type
 - Parallel Flow
 - Hauteur
 - 26 In.
 - Largeur
 - 13-5/16 In.
 - Épaisseur
 - 5/8 In.
 - Type d'entrée
 - Block Fitting
 - Type de sortie
 - Block Fitting
 - Code pop.
 - B
 
98132
Spécifications
- Mat. faisceau
 - Aluminum
 - Mat. réservoir
 - Aluminum
 - Hauteur
 - 4-1/16 in.
 - Largeur
 - 10-3/16 in.
 - Épaisseur
 - 1 in.
 - Entrée
 - 5/8 in. Diameter
 - Sortie
 - 5/8 in. Diameter
 - Code pop.
 - D
 
C-710
Ignition Coil Mounts to Cylinder Head; Qty Req.: 6
                                                Spécifications
- Ignition Type
 - Electronic
 - Type de connecteur
 - Male
 - Nombre de broche
 - 4
 - Forme de la broche
 - Blade
 - Longueur
 - 6-11/16 In.
 - Code pop.
 - C
 
CU2968
Spécifications
- Mat. faisceau
 - Aluminum
 - Mat. réservoir
 - Plastic
 - Rangée
 - 1
 - Hauteur
 - 14-3/4 In.
 - Largeur
 - 28-1/16 In.
 - Épaisseur
 - 7/8 In.
 - Collecteur d'entrée
 - 29-1/16 In. x 2 In.
 - Collecteur de sortie
 - 29-1/16 In. x 2 In.
 - Entrée
 - 1-1/2 In.
 - Sortie
 - 1-1/2 In.
 - Code pop.
 - D
 
FI1518
Spécifications
- Description
 - Direct Injection High Pressure Fuel Pump
 - Type de carb.
 - Gas
 - Type d'entrée
 - Threaded
 - Type de sortie
 - Threaded
 - Code pop.
 - W
 
FN1060
Spécifications
- Type de coupe
 - Threaded
 - Type de carb.
 - Gas
 - Diamètre
 - 1 in.
 - Longueur
 - 25 in.
 - Évent 1
 - 1/4 in.
 - Quantité d'évents
 - 1
 - Code pop.
 - D
 
MA175
Sensor Only
                                                Spécifications
- Mat. faisceau
 - Plastic
 - Type de connecteur
 - Male
 - Forme du connecteur
 - Oval
 - Forme de la broche
 - Spade
 - Nombre de broche
 - 5
 - Code pop.
 - C
 
OS5482
w/ 4 Wires; Position: Upstream Right; Qty Req.: 1 OR w/ 4 Wires; Position: Upstream Left; Qty Req.: 1
                                                Spécifications
- Type
 - Heated
 - Type de sonde
 - Afr
 - Forme du connecteur
 - Square
 - Type de connecteur
 - Male
 - Nombre de broche
 - 4
 - Longueur totale
 - 12-5/8 In.
 - Filet
 - M18x1.5
 - Dimension de clé
 - 7/8
 - Type d'installation
 - Screw
 - Code pop.
 - W
 
OS6169
Drive Type: AWD; Position: Downstream Left; Qty Req.: 1
                                                Spécifications
- Type
 - Heated
 - Type de sonde
 - Thimble
 - Forme du connecteur
 - Square
 - Type de connecteur
 - Male
 - Nombre de broche
 - 4
 - Longueur totale
 - 45-1/16 In.
 - Filet
 - M18x1.5
 - Dimension de clé
 - 7/8
 - Type d'installation
 - Screw
 - Code pop.
 - W
 
OS6172
Drive Type: RWD; Position: Downstream Left; Qty Req.: 1 OR Position: Downstream Right; Qty Req.: 1
                                                Spécifications
- Type
 - Heated
 - Type de sonde
 - Thimble
 - Forme du connecteur
 - Rectangular
 - Type de connecteur
 - Male
 - Nombre de broche
 - 4
 - Longueur totale
 - 24-13/16 In.
 - Filet
 - M18x1.5
 - Dimension de clé
 - 7/8
 - Type d'installation
 - Screw
 - Code pop.
 - W
 
S10224
Position: Rear Right; Qty Req.: 1 OR Position: Rear Left; Qty Req.: 1
                                                Spécifications
- Type de connecteur
 - Male
 - Forme du connecteur
 - Rectangular
 - Nombre de broche
 - 3
 - Forme de la broche
 - Pin
 - Code pop.
 - A
 
S10419
Position: Front Left; Qty Req.: 1
                                                Spécifications
- Type de connecteur
 - Male
 - Forme du connecteur
 - Rectangular
 - Nombre de broche
 - 3
 - Forme de la broche
 - Blade
 - Code pop.
 - C
 
SP1389
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
                                                Spécifications
- Description
 - Electrical Fuel Pump
 - Type de carb.
 - Gas
 - Débit
 - 55 - 65 gph
 - Variation de pression
 - 110 - 140 psi
 - Type
 - Turbine
 - Type d'entrée
 - Strainer
 - Type de sortie
 - Hose
 - Tension
 - 12
 - Joints d'étanchéité
 - No
 - Crépines
 - No
 - Code pop.
 - D
 
SP9046M
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
                                                Spécifications
- Description
 - Fuel Pump Module Assembly
 - Type de carb.
 - Gas
 - Type d'entrée
 - Push In - 5/16 in. Diameter
 - Type de sortie
 - Push In - 5/16 in. Diameter
 - Variation de pression
 - 50-70 psi
 - Débit
 - 60-70 gph
 - Résistance
 - 230-8 Ohms
 - Anneau de verrouillage
 - Not Included
 - Joint torique
 - Included
 - Crépines
 - Included, Mounted Internally
 - Code pop.
 - C
 
TB1121
Spécifications
- Longueur
 - 5.6875 in.
 - Largeur
 - 4.9375 in.
 - Connecteur
 - 6 Pin Male
 - Diamètre intérieur
 - 2.75 in.
 - Code pop.
 - C
 
TOP35A
Drive Type: RWD; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included; Position: Lower; Qty Req.: 1
                                                Spécifications
- Mat. faisceau
 - Cold Rolled Steel (EDDQ)
 - Hauteur
 - 1.6875 In.
 - Filetage du bouchon de vidange
 - M12 X 1.5
 - Litre
 - 5.9
 - Code pop.
 - C
 
TOP36A
Drive Type: AWD; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included; Position: Lower; Qty Req.: 1
                                                Spécifications
- Mat. faisceau
 - Cold Rolled Steel (EDDQ)
 - Hauteur
 - 1.125 In.
 - Filetage du bouchon de vidange
 - M12 X 1.25
 - Litre
 - 5.9
 - Code pop.
 - C
 
TOP74A
Drive Type: RWD; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included; Position: Upper; Qty Req.: 1
                                                Spécifications
- Mat. faisceau
 - Aluminum
 - Hauteur
 - 4.1875 In.
 - Litre
 - 6.4
 - Code pop.
 - D
 



















