Evaporator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- D
- Eng. Desg.
- -
Showing parts 1 to 16 out of 16.
7-3244
without Receiver Drier
Part Specifications
- Type
- Tube & Fin
- Height
- 27-1/2 In.
- Width
- 15-9/16 In.
- Thickness
- 1 In.
- Inlet Type
- Male Threaded
- Outlet Type
- Male Threaded
- Pop. Code
- W
Condenser
94485
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 6-1/8 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-562
Ignition Coil Mounts to Cylinder Head; Qty Req.: 2
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Female
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- D
Ignition Coil
CU658
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 28-1/4 In.
- Width
- 15-1/16 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 16-3/8 In. x 2-3/8 In.
- Outlet Header
- 16-3/8 In. x 2-3/8 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- TOC
- Plated
- Pop. Code
- D
Automotive Radiator
FG09A
w/ Harness Codes: WEM; WEC; WER
Part Specifications
- Description
- Fuel Tank Sending Unit
- Inlet
- Inverted Flare 5/16 in. Diameter
- Outlet
- Inverted Flare 3/8 in. Diameter
- Outlet nb.
- 1
- Wires
- 4
- Resistance
- 0-95
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO20
- Pop. Code
- D
Sending Unit Classic
FN685
Position: Upper; Qty Req.: 1
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/2 in.
- Length
- 28 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FNH089
Part Specifications
- Overall Length
- 8-3/16 in.
- End 1 Inner Diameter
- 1-1/2 in.
- End 1 Outer Diameter
- 1-13/16 in.
- End 2 Inner Diameter
- 1-1/2 in.
- End 2 Outer Diameter
- 1-13/16 in.
- Pop. Code
- D
Filler Neck Hose
GM30A
30.75in x 30.25in x 10.125in
Part Specifications
- US Gallon
- 16
- Liter
- 63
- Length
- 30-3/4 in.
- Width
- 30-1/4 in.
- Height
- 10-1/8 in.
- Kit
- LO20 (Included)
- Strap Set
- ST70 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- B
Fuel Tank
GMP55A
Stamped #24570333; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 5.1875 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 3.8
- Pop. Code
- W
Oil Pan
LO20
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4-1/2 in.
- Inside Diameter
- 3-3/4 in.
- Pop. Code
- D
Lock Ring
MP102
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5043
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Unheated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 1
- Overall Length
- 16-5/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1117
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 43.3 - 52.6 gph
- Pressure Range
- 72.5 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
ST70
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 39-7/8 in. / ST#2 = 39-7/8 in.
- Pop. Code
- C
Strap
Strainer 