Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- CARB
- ASP.
- N
- Eng. VIN
- H
- Eng. Desg.
- -
Showing parts 1 to 19 out of 19.
7-3603
without Receiver Drier; with Factory Installed A/C
Part Specifications
- Type
- Parallel Flow
- Height
- 19-3/8 In.
- Width
- 14-7/8 In.
- Thickness
- 5/8 In.
- Inlet Type
- Male Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- C
Condenser
94571
with High Output Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/16 in.
- Width
- 6 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
94572
without Air Conditioning; with Standard Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-3/16 in.
- Width
- 5-7/8 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
94575
with Air Conditioning; with Standard Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-1/8 in.
- Width
- 5-7/8 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
C-610
Pack
Part Specifications
- Ignition Type
- Standard
- Terminal Count
- 2
- Terminal Shape
- Threaded
- Pop. Code
- C
Ignition Coil
F1A
34.75in x 27in x 8.125in; with 19 Gallon Tank; without Roll-Over Valve; Position: Rear; Qty Req.: 1
Part Specifications
- US Gallon
- 19
- Liter
- 72
- Length
- 34-3/4 in.
- Width
- 27 in.
- Height
- 8-1/8 in.
- Kit
- LO03 (Included)
- Strap Set
- ST16 (BOTTOM STRAP ONLY) (Not Included)
- Comments
- Vent Pipe Toward Rear Of Truck
- Pop. Code
- A
Classic Fuel Tank
F1B
34.75in x 27in x 8.125in; with 19 Gallon Tank; with Roll-Over Valve; Position: Rear; Qty Req.: 1
Part Specifications
- US Gallon
- 19
- Liter
- 72
- Length
- 34-3/4 in.
- Width
- 27 in.
- Height
- 8-1/8 in.
- Kit
- LO03 (Included)
- Strap Set
- ST16 (BOTTOM STRAP ONLY) (Not Included)
- Comments
- Vent Pipe Toward Front Of Truck
- Pop. Code
- A
Classic Fuel Tank
F25A
60in x 14in x 13.5in; with 22.5 Gallon Tank; w/o E.E.C. (Evaporative Emission Control); Position: Right; Qty Req.: 1 OR 60in x 14in x 13.5in; with 22.5 Gallon Tank; w/o E.E.C. (Evaporative Emission Control); Position: Left; Qty Req.: 1
Part Specifications
- US Gallon
- 22.5
- Liter
- 86
- Length
- 60 in.
- Width
- 14 in.
- Height
- 13-1/2 in.
- Kit
- LO03 (Included)
- Comments
- W/ One Gauge Hole
- Pop. Code
- A
Classic Fuel Tank
F25B
60in x 14in x 13.5in; with 20.2 Gallon Tank; with Evaporative Emission; Position: Right; Qty Req.: 1 OR 60in x 14in x 13.5in; with 20.2 Gallon Tank; with Evaporative Emission; Position: Left; Qty Req.: 1
Part Specifications
- US Gallon
- 20.2
- Liter
- 77
- Length
- 60 in.
- Width
- 14 in.
- Height
- 13-1/2 in.
- Kit
- LO03 (2x) (Included)
- Comments
- W/ Two Gauge Holes
- Pop. Code
- A
Classic Fuel Tank
F26A
34.75in x 27in x 13.75in; with 38 Gallon Tank; without Roll-Over Valve; Optional High Capacity Tank; Requires Modification Of Sending Unit As Per Instructions In Box; Position: Rear; Qty Req.: 1
Part Specifications
- US Gallon
- 38
- Liter
- 144
- Length
- 35-1/4 in.
- Width
- 26-15/16 in.
- Height
- 13-13/16 in.
- Kit
- LO03, LO26A (INSTALLATION KIT)
- Strap Set
- ST16 (BOTTOM STRAP ONLY) (Not Included)
- Comments
- Without Roll Over Valve Hole
- Pop. Code
- C
Classic Fuel Tank
F26B
34.75in x 27in x 13.75in; with 38 Gallon Tank; with Roll-Over Valve; Optional High Capacity Tank; Requires Modification Of Sending Unit As Per Instructions In Box; Position: Rear; Qty Req.: 1
Part Specifications
- US Gallon
- 38
- Liter
- 144
- Length
- 35-1/4 in.
- Width
- 26-15/16 in.
- Height
- 13-13/16 in.
- Kit
- LO03, LO26A (INSTALLATION KIT)
- Strap Set
- ST16 (BOTTOM STRAP ONLY) (Not Included)
- Comments
- With Roll Over Valve Hole
- Pop. Code
- C
Fuel Tank
FG73A
Rear Mount; 19 Gallons Tank
Part Specifications
- Description
- Fuel Tank Sending Unit
- Outlet
- Butt Flare 5/16 in. Diameter
- Outlet nb.
- 1
- Wires
- 1
- Resistance
- 75-10
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO03
- Pop. Code
- A
Sending Unit Classic
LO03
with 2in Sending Unit Hole
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 2-11/16 in.
- Inside Diameter
- 2-3/16 in.
- Pop. Code
- B
Lock Ring
LO26A
Modification Kit (Fuel Level Sender)
Part Specifications
- Material
- Steel/Copper
- Comments
- Level Sender Mod Kit For 38gal. Tank
- Pop. Code
- D
Lock Ring
SP1031MP
w/o In-Cab Fuel Tank
Part Specifications
- Description
- Mechanical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 25 - 35 gph
- Pressure Range
- 5.5 - 7 psi
- Inlet Type
- Butt Flare
- Outlet Type
- Threaded
- Outlet
- 1/2-20 UNF
- Gaskets
- Included
- Strainers
- Not Included
- Pop. Code
- B
Fuel Pump 
SP1059MP
w/ In-Cab Fuel Tank
Part Specifications
- Description
- Mechanical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 30 - 30 gph
- Pressure Range
- 5.5 - 6.5 psi
- Inlet Type
- Butt Flare
- Outlet Type
- Butt Flare
- Gaskets
- Included
- Strainers
- Included
- Pop. Code
- B
Fuel Pump 
ST16
Behind Rear Axle
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 31-3/4 in. / ST#2 = 31-3/4 in.
- Pop. Code
- A
Strap
Strainer 