0690016
New; with Clutch; SD7H15 Compressor; Replacement of Stretch Fit Belt Required
Part Specifications
- Pop. Code
- N
Compressor
or
Search Results
- Fuel
- DIESEL
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- -
- Eng. Desg.
- DT466
Showing parts 1 to 8 out of 8.
2001-3538
with 36.625in x 28.1875in x 2.1875in Core; Inlet 2.1875 in. Upper Right Side; Outlet 2.5 in. Middle Left Side; w/ TOC (Transmission Oil Cooler) 20.625 in. Engine Side; May Require Use Of Provided Mounting Rubbers
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Type
- Downflow
- Row
- 2
- Height
- 36-5/8 In.
- Width
- 28-3/16 In.
- Thickness
- 2-3/16 In.
- Inlet
- 2-3/16 In.
- Outlet
- 2-1/2 In.
- TOC
- 20-11/16 In. Bottom tank
- Radiator frames included
- No
- Kit
- 2x Instruction Sheets; 4x Rubber Mounts; 1x Spill Proof Fitting
- Pop. Code
- D
HD Radiator
2001-3557
with 36.5625in x 29.375in x 2.1875in Core; without Transmission Oil Cooler; Inlet 2.25 in Upper Right Side.; Outlet 2.5 in. Middle Left Side; May Require Use Of Provided Mounting Rubbers
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Type
- Crossflow
- Row
- 2
- Height
- 36-9/16 In.
- Width
- 29-3/8 In.
- Thickness
- 2-3/16 In.
- Inlet
- 2-1/4 In.
- Outlet
- 2-1/2 In.
- Kit
- 2x Instruction Sheets; 4x Rubber Mounts, 1x Spill Proof Fitting(1/4-18 NPT)
- Pop. Code
- D
HD Radiator
4401-3512
with 32.0625in x 9.5in x 3.9375in Core; with 3.5in Inlet; with 3.5in Outlets
Part Specifications
- Application
- International
- Type
- Tube & Fin
- Height
- 33-1/16 In.
- Width
- 9-1/2 In.
- Thickness
- 3-15/16 In.
- Inlet
- 3-1/2 In.
- Outlet
- 3-1/2 In.
- Pop. Code
- C
Charge Air Cooler
7-9073
without Receiver Drier; with 20.625in x 23.125in x 0.625in Core; Inlet Fitting Block Style / Outlet Fitting Block Style
Part Specifications
- Type
- Parallel Flow
- Height
- 20-5/8 In.
- Width
- 23-1/8 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Heavy duty condenser
99438
with Bergstrom A/C System; with 11.8125in x 6.9375in x 1.625in Core; with 0.625in Diameter Inlet; with 0.75in Diameter Outlet; Front Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 11-13/16 in.
- Width
- 6-15/16 in.
- Thickness
- 1-5/8 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heavy duty heater
DTP07A
Replaces OE Part Number(s) 1832248C91, 1832249C91, 1832249C92, 180134C91, 1842117C91, 1842118C91, 1876974C91, 1876974C92, 7078044C91, 7078366C91; Failure to use the vehicle OEM approved sealing method will void the warranty.; Front Or Rear Sump; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Steel
- Height
- 10.6299 In.
- Drain Plug Thread
- M18 - 1.5
- Liter
- 28.39
- Pop. Code
- C
Oil Pan
ST560
For 50 to 60 Gallons Square Tank
Part Specifications
- Comments
- Includes 1 Strap; St#1 = 41-3/8 In
- Pop. Code
- B
Strap
