0283023
Part Specifications
- Material
- Aluminum
- Length
- 8.5 in.
- Diameter
- 3.5 in.
- Inlet
- 0.75 in.
- Pop. Code
- D
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- 4
- Eng. Desg.
- -
Showing parts 1 to 20 out of 20.
0658157
New; with Clutch; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 4.5276 In.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
Evaporator
Evaporator
7-3023
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 32.8125 In.
- Width
- 14.4375 In.
- Thickness
- 0.8125 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
93009
Replaces Aluminum And Copper/Brass Heater; Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-7/8 in.
- Width
- 6-5/8 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
94781
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-5/8 in.
- Width
- 7-1/2 in.
- Thickness
- 2 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heater
C-505
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU2258
Hoist May Be Required for Radiator Installation Underneath the Vehicle
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 29.875 In.
- Width
- 16.8125 In.
- Thickness
- 1 In.
- Inlet Header
- 18.25 In.
- Outlet Header
- 18.25 In.
- Inlet
- 1.5 In.
- Outlet
- 1.5 In.
- TOC
- Plated
- Pop. Code
- D
Automotive Radiator
FN755
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 22 in.
- Vent 1
- 3/4 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FNH168
Part Specifications
- Overall Length
- 8-7/16 in.
- End 1 Inner Diameter
- 1-7/16 in.
- End 1 Outer Diameter
- 1-11/16 in.
- End 2 Inner Diameter
- 1-1/4 in.
- End 2 Outer Diameter
- 1-9/16 in.
- Pop. Code
- C
Filler Neck Hose
FP88A
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 8.0177 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 4.7
- Pop. Code
- W
Oil Pan
MA160
Sensor Module with Housing
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Spade
- Terminal Count
- 6
- Pop. Code
- A
Mass Airflow Sensor
MA206
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 6
- Pop. Code
- C
Mass Airflow Sensor
OS5041
Position: Upstream Right; Qty Req.: 1 OR Position: Upstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 19-5/16 In.
- Thread
- M18x1.5
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1119
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 59 - 65 gph
- Pressure Range
- 87 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- C
Fuel Pump
SP2248M
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-94 psi
- Flow Rate
- 29-34 gph
- Resistance
- 15-160 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included
- Pop. Code
- D
Fuel Module
ST169
with 26 Gallon Tank; with Plastic Tank
Part Specifications
- Comments
- Includes 3 Straps; St#1 = 41 In. / St#2 = 37-3/4 In. / St#3 = 35 In.
- Pop. Code
- D
Strap
Strainer
Strainer
