Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- Z
- Eng. Desg.
- LB4
Showing parts 1 to 14 out of 14.
7-4013
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 26-1/2 In.
- Width
- 14-3/16 In.
- Thickness
- 5/8 In.
- Inlet Type
- Male Threaded
- Outlet Type
- Male Threaded
- Pop. Code
- A
Condenser
94505
with Air Conditioning
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/16 in.
- Width
- 5 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- A
Heater
94506
without Air Conditioning
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-5/8 in.
- Width
- 6-11/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- B
Heater
C-611
Pack
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Female
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- A
Ignition Coil
GM306C
36.25in x 24.25in x 8.875in; with Filler Neck
Part Specifications
- US Gallon
- 17
- Liter
- 64
- Length
- 36-1/4 in.
- Width
- 24-1/4 in.
- Height
- 8-7/8 in.
- Kit
- LO01 (Included)
- Strap Set
- ST06 (Not Included)
- Comments
- Filler Neck Fn06 Installed
- Pop. Code
- C
Fuel Tank
GM3C
36.25in x 24.25in x 8.875in; without Filler Neck
Part Specifications
- US Gallon
- 17
- Liter
- 64
- Length
- 36-1/4 in.
- Width
- 24-1/4 in.
- Height
- 8-7/8 in.
- Kit
- LO01 (Included)
- Strap Set
- ST06 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- D
Fuel Tank
LO01
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 3-7/8 in.
- Inside Diameter
- 3-1/8 in.
- Pop. Code
- A
Lock Ring
MP102
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5043
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Unheated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 1
- Overall Length
- 16-5/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1114
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 43.3 - 49.5 gph
- Pressure Range
- 12 - 26 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP172A1H
For Use With OE Or Replacement Fuel Injection Tank
Part Specifications
- Description
- Fuel Pump and Sender Assembly
- Inlet
- Butt Flare 5/16 in. Diameter
- Outlet
- Butt Flare 3/8 in. Diameter
- Outlet nb.
- 1
- Resistance
- 0-96
- Flow Rate
- 50-58 gph
- Pressure Range
- 15-25 psi
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Pop. Code
- D
Sending Unit Classic
ST06
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 37-3/8 in. / ST#2 = 37-3/8 in.
- Pop. Code
- B
Strap
Strainer 