0610118
New; with Clutch; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 4-1/2 in.
- Grooves
- 5
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- R
- Eng. Desg.
- L31
Showing parts 1 to 20 out of 20.
1054573
Part Specifications
- Height
- 10-5/16 in.
- Width
- 11 in.
- Thickness
- 2-7/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 11/16 in. OD
- Pop. Code
- A
Evaporator
7-3026
without Receiver Drier; with Dual A/C System
Part Specifications
- Type
- Parallel Flow
- Height
- 35-1/16 In.
- Width
- 16-1/16 In.
- Thickness
- 11/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- A
Condenser
7-4953
without Receiver Drier; without Dual A/C System
Part Specifications
- Type
- Parallel Flow
- Height
- 29-1/16 In.
- Width
- 16-1/16 In.
- Thickness
- 11/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- A
Condenser
93050
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-1/2 in.
- Thickness
- 1-3/8 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- A
Heater
C-594
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU1693
Transmission Control Type: Automatic; with 34in x 17.25in x 1.25in Core; w/ TOC (Transmission Oil Cooler); w/ EOC (Engine Oil Cooler); Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 34 In.
- Width
- 17-1/4 In.
- Thickness
- 1 In.
- Inlet Header
- 18-3/8 In. x 3-1/16 In.
- Outlet Header
- 18-3/8 In. x 3-1/16 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-9/16 In.
- EOC
- Plated
- TOC
- Plated
- Pop. Code
- A
Automotive Radiator
CU2315
Transmission Control Type: Manual; with 34in Between Tanks; without Transmission Oil Cooler; with Engine Oil Cooler; with Standard Duty Cooling; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 34-1/16 In.
- Width
- 16-7/8 In.
- Thickness
- 1 In.
- Inlet Header
- 18-7/16 In. x 3-3/16 In.
- Outlet Header
- 18-7/16 In. x 3-3/16 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-9/16 In.
- EOC
- Plated
- Pop. Code
- D
Automotive Radiator
Differential Cover
Differential Cover
Differential Cover
FC1203T
Transmission Control Type: Automatic; Transmission Num Speeds: 4
Part Specifications
- Description
- Automatic Transmission Oil Cooler Assembly
- Material
- Aluminum / Plastic
- Installation Hardware
- Included
- Pop. Code
- W
Fluid Cooler
FN795
Bed Type: Fleetside
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2 in.
- Length
- 35 in.
- Vent Quantity
- 0
- Pop. Code
- A
Filler Neck
FNH155
Bed Type: Fleetside
Part Specifications
- Overall Length
- 20-1/4 in.
- End 1 Inner Diameter
- 2 in.
- End 1 Outer Diameter
- 2-3/8 in.
- End 2 Inner Diameter
- 2 in.
- End 2 Outer Diameter
- 2-3/8 in.
- Pop. Code
- A
Filler Neck Hose
GMP02A
with 4 Quart Oil Pan; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 7.9375 In.
- Drain Plug Thread
- M14 X 1.5
- Liter
- 3.8
- Pop. Code
- A
Oil Pan
GMP26A
with 5 Quart Oil Pan; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 8.125 In.
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.8
- Pop. Code
- B
Oil Pan
LO185
Fuel Pump Seal
Part Specifications
- Material
- Plastic / Polymer
- Outside Diameter
- 3-15/16
- Inside Diameter
- 3-3/4
- Pop. Code
- C
Lock Ring
MA145
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 5
- Pop. Code
- A
Mass Airflow Sensor
ST183
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 31-1/4 In. / St#2 = 31-1/4 In.
- Pop. Code
- A
Strap
TR19
with 3.5in Sending Unit Hole
Part Specifications
- Material
- Steel
- Outside Diameter
- 5-11/16 in.
- Inside Diameter
- 3-7/16 in.
- Pop. Code
- A
Lock Ring
