Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- J
- Eng. Desg.
- LG8
Showing parts 1 to 21 out of 21.
0658992
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 5-3/16 in.
- Grooves
- 5
- Clutch Included
- Yes
- Pop. Code
- C
Compressor
Evaporator
7-4550
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 30-3/8 In.
- Width
- 15-13/16 In.
- Thickness
- 11/16 In.
- Inlet Type
- Male Threaded
- Outlet Type
- Male Threaded
- Pop. Code
- D
Condenser
94485
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 6-1/8 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-503
Ignition Coil Mounts to Cylinder Head; Qty Req.: 3
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Pin
- Pop. Code
- A
Ignition Coil
CU2251
1 in. Thick Core; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 30-1/2 In.
- Width
- 15-5/16 In.
- Thickness
- 1 In.
- Inlet Header
- 16-9/16 In. x 2-7/16 In.
- Outlet Header
- 16-9/16 In. x 2-7/16 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- TOC
- Plated
- Pop. Code
- D
Automotive Radiator
FN708
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1 in.
- Length
- 30 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
GM30C
30.75in x 30.25in x 10.125in
Part Specifications
- US Gallon
- 17
- Liter
- 65
- Length
- 30-3/4 in.
- Width
- 30-1/4 in.
- Height
- 10-1/8 in.
- Kit
- LO91, LO125 (Included)
- Strap Set
- ST70 (Not Included)
- Comments
- W/O Pan In Tank
- Pop. Code
- W
Fuel Tank
GMP11B
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.5625 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.8
- Pop. Code
- C
Oil Pan
LO91
Lock Ring (Fuel Pump Module); (Includes O-Ring)
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4-13/16 in.
- Inside Diameter
- 4-5/16 in.
- Pop. Code
- A
Lock Ring
MA100
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 3
- Pop. Code
- B
Mass Airflow Sensor
MA231
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- C
Mass Airflow Sensor
MP102
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5042
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 16-1/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5046
Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 14-3/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10073
Behind Balancer
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
S10119
Cam Sensor Located on Side of Block
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
S10180
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP6220M
Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- W
Fuel Module 
ST70
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 39-7/8 in. / ST#2 = 39-7/8 in.
- Pop. Code
- C
Strap
