Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- 6
- Eng. Desg.
- -
Showing parts 1 to 18 out of 18.
0658157
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-1/2 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
1010051
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 9-1/16 in.
- Width
- 10 in.
- Thickness
- 2-5/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 1/2 in. OD
- Outlet
- 11/16 in. OD
- Pop. Code
- D
Evaporator
Evaporator
7-3023
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 32-13/16 In.
- Width
- 14-7/16 In.
- Thickness
- 13/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
93009
Replaces Aluminum And Copper/Brass Heater; Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-7/8 in.
- Width
- 6-5/8 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heater
98098
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 9-1/2 in.
- Width
- 5-15/16 in.
- Thickness
- 1-5/8 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- C
Heater
C-565
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- B
Ignition Coil
CU2258
Hoist May Be Required for Radiator Installation Underneath the Vehicle
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 29-7/8 In.
- Width
- 16-13/16 In.
- Thickness
- 1 In.
- Inlet Header
- 18-1/4 In. x 1-7/8 In.
- Outlet Header
- 18-1/4 In. x 1-7/8 In.
- Inlet
- 1-1/2 In.
- Outlet
- 1-1/2 In.
- TOC
- Plated
- Pop. Code
- D
Automotive Radiator
FN822
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 15 in.
- Vent Quantity
- 0
- Pop. Code
- D
Filler Neck
FP68A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 8.375 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 4.8
- Pop. Code
- C
Oil Pan
LO172
Fuel Pump Retainer
Part Specifications
- Material
- Plastic / Polymer
- Outside Diameter
- 6-7/16 in.
- Inside Diameter
- 5-13/16 in.
- Pop. Code
- C
Lock Ring
MA147
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 6
- Pop. Code
- A
Mass Airflow Sensor
OS5037
Position: Downstream Right; Qty Req.: 1 OR Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 17-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5041
Position: Upstream Right; Qty Req.: 1 OR Position: Upstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 19-5/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1150
Strainer Included w/ Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 58.2 - 67.5 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- Yes
- Pop. Code
- B
Fuel Pump 
SP2383M
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 80-116 psi
- Flow Rate
- 57-67 gph
- Resistance
- 15-160 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST281
Part Specifications
- Comments
- INCLUDES 3 STRAPS; ST#1 = 33-3/4 in. / ST#2 = 38 in. / ST#3 = 41-1/2 in.
- Pop. Code
- D
Strap
