Accumulator
or
Search Results
- Fuel
- DIESEL
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- F
- Eng. Desg.
- L65
Showing parts 1 to 11 out of 11.
1054598
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 11-7/16 in.
- Width
- 9-7/16 in.
- Thickness
- 2-15/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 5/8 in. OD
- Pop. Code
- A
Evaporator
Evaporator
7-4295
without Receiver Drier; For R134a Retrofit Only
Part Specifications
- Type
- Parallel Flow
- Height
- 27-7/8 In.
- Width
- 15-3/8 In.
- Thickness
- 11/16 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- A
Condenser
7-4721
without Receiver Drier; with Pressure Switch Port; Except R134A Retrofit
Part Specifications
- Type
- Parallel Flow
- Height
- 27-5/8 In.
- Width
- 16-3/16 In.
- Thickness
- 7/8 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- A
Condenser
94483
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-1/2 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heavy duty heater
94764
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 6-3/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heater
GMP02A
with 4 Quart Oil Pan; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 7.9375 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 3.8
- Pop. Code
- A
Oil Pan
GMP26A
with 5 Quart Oil Pan; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 8.125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.8
- Pop. Code
- B
Oil Pan
MP102
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
SP1114
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 43.3 - 49.5 gph
- Pressure Range
- 12 - 26 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- A
Fuel Pump 