Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- D16Z6
Showing parts 1 to 16 out of 16.
94750
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-7/8 in.
- Width
- 5 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heater
C-567
Pack
Part Specifications
- Ignition Type
- Standard
- Connector Gender
- Female
- Terminal Count
- 2
- Terminal Shape
- Threaded
- Pop. Code
- D
Ignition Coil
CU1290
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 13-3/4 In.
- Width
- 13-5/8 In.
- Thickness
- 13/16 In.
- Inlet Header
- 14-3/4 In. x 1-15/16 In.
- Outlet Header
- 14-3/4 In. x 1-15/16 In.
- Inlet
- 1-1/8 In.
- Outlet
- 1-1/8 In.
- TOC
- Concentric
- Pop. Code
- B
Automotive Radiator
FN503
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-3/8 in.
- Length
- 23-1/2 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
FNH099
with California Emissions System; with Federal Emissions System
Part Specifications
- Overall Length
- 7-3/16 in.
- End 1 Inner Diameter
- 1-5/16 in.
- End 1 Outer Diameter
- 1-1/2 in.
- End 2 Inner Diameter
- 1-5/16 in.
- End 2 Outer Diameter
- 1-1/2 in.
- Pop. Code
- C
Filler Neck Hose
HO9
33in x 27.375in x 9.5in
Part Specifications
- US Gallon
- 13.5
- Liter
- 51
- Length
- 33 in.
- Width
- 27-3/8 in.
- Height
- 9-1/2 in.
- Kit
- LO15, LO24 (Included)
- Strap Set
- ST144 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- B
Fuel Tank
HOP03A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.6875 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 3.3
- Pop. Code
- C
Oil Pan
LO15
Lock Ring (Fuel Level Sender); (Includes O-Ring)
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 2-13/16 in.
- Inside Diameter
- 1-15/16 in.
- Pop. Code
- D
Lock Ring
LO24
Gasket And Screw Set For Fuel Pump Assembly
Part Specifications
- Material
- Polymer
- Outside Diameter
- 4-7/8 in.
- Inside Diameter
- 2-9/16 in.
- Comments
- Nuts Included
- Pop. Code
- C
Lock Ring
OS5098
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 18-5/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1126
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 46.6 - 55.7 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP8338H
Part Specifications
- Description
- Fuel Pump Hanger Assembly
- Fuel Type
- Gas
- Inlet Type
- Butt Flare - 1/4 in. Diameter
- Outlet Type
- Threaded Hole - M10 x 1.25
- Pressure Range
- 65-80 psi
- Flow Rate
- 37-43 gph
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST144
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 31-3/4 in. / ST#2 = 30-3/4 in.
- Pop. Code
- C
Strap
Strainer 
VTS1088
Valve Only
Part Specifications
- Length
- 2-1/2 In.
- Width
- 1-5/8 In.
- Connector Quantity
- 1
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 1
- Terminal Shape
- Blade
- Pop. Code
- W
Variable Valve Timing Solenoid
