0233588
Part Specifications
- Material
- Aluminum
- Length
- 6 in.
- Diameter
- 2.5 in.
- Inlet
- 0.375 in.
- Pop. Code
- D
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- D16Z6
Showing parts 1 to 20 out of 20.
0610053
New; with Clutch; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 4.1732 In.
- Grooves
- 4
- Clutch Included
- Yes
- Pop. Code
- W
Compressor
1054167
with Pad Mount Core; Position: Front; Qty Req.: 1
Part Specifications
- Tank Material
- Aluminum
- Pop. Code
- W
Evaporator
7-4540
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 12.375 In.
- Width
- 12.25 In.
- Thickness
- 1 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
94750
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-7/8 in.
- Width
- 5 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-567
Pack
Part Specifications
- Ignition Type
- Standard
- Connector Gender
- Female
- Terminal Count
- 2
- Terminal Shape
- Threaded
- Pop. Code
- C
Ignition Coil
CU1290
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 13.75 In.
- Width
- 13.625 In.
- Thickness
- 0.8125 In.
- Inlet Header
- 14.75 In.
- Outlet Header
- 14.75 In.
- Inlet
- 1.125 In.
- Outlet
- 1.125 In.
- TOC
- Concentric
- Pop. Code
- A
Automotive Radiator
FG184A
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Hanger
- Inlet
- Butt Flare 1/4 in. Diameter
- Outlet
- Female Thread
- Outlet nb.
- 1
- Wires
- 2
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Pop. Code
- W
Sending Unit
FN503
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-3/8 in.
- Length
- 23-1/2 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- A
Filler Neck
FNH099
with California Emissions System; with Federal Emissions System
Part Specifications
- Overall Length
- 7-3/16 in.
- End 1 Inner Diameter
- 1-5/16 in.
- End 1 Outer Diameter
- 1-1/2 in.
- End 2 Inner Diameter
- 1-5/16 in.
- End 2 Outer Diameter
- 1-1/2 in.
- Pop. Code
- C
Filler Neck Hose
HO9
33in x 27.375in x 9.5in
Part Specifications
- US Gallon
- 13.5
- Liter
- 51
- Length
- 33 in.
- Width
- 27-3/8 in.
- Height
- 9-1/2 in.
- Kit
- LO15, LO24 (Included)
- Strap Set
- ST144 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- B
Fuel Tank
HOP03A
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.7087 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 3.3
- Pop. Code
- C
Oil Pan
LO15
Lock Ring (Fuel Level Sender); (Includes O-Ring)
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 2.8125 In.
- Inside Diameter
- 1.9375 In.
- Pop. Code
- D
Lock Ring
LO24
Gasket And Screw Set For Fuel Pump Assembly
Part Specifications
- Material
- Polymer
- Outside Diameter
- 4-7/8 in.
- Inside Diameter
- 2-9/16 in.
- Comments
- Nuts Included
- Pop. Code
- D
Lock Ring
MP109
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Round
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5098
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 18-5/16 In.
- Thread
- M18x1.5
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1126
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 47 - 55.7 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- No
- Strainers
- No
- Pop. Code
- C
Fuel Pump
SP8338H
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Hanger Assembly
- Fuel Type
- Gas
- Inlet Type
- Butt Flare - 1/4 in. Diameter
- Outlet Type
- Threaded Hole - M10 x 1.25
- Pressure Range
- 65-80 psi
- Flow Rate
- 37-43 gph
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- C
Fuel Module
ST144
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 31-3/4 In. / St#2 = 30-3/4 In.
- Pop. Code
- C
Strap
Strainer
