0233280
with Dealer Installed A/C
Part Specifications
- Material
- Steel
- Length
- 8 in.
- Diameter
- 2.5 in.
- Inlet
- 0.375 in.
- Pop. Code
- C
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- CARB
- ASP.
- N
- Eng. VIN
- G
- Eng. Desg.
- -
Showing parts 1 to 18 out of 18.
94576
without Air Conditioning; with Standard Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/16 in.
- Width
- 6 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
94584
with High Output Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 9-1/16 in.
- Width
- 6 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
94629
with Air Conditioning; with Standard Heater
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-1/16 in.
- Width
- 7-11/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-610
Pack
Part Specifications
- Ignition Type
- Standard
- Terminal Count
- 2
- Terminal Shape
- Threaded
- Pop. Code
- B
Ignition Coil
DC0704
with 10.5in Diameter Ring Gear; Position: Rear; Qty Req.: 1
Part Specifications
- Material
- Steel
- Mounting Type
- 12 Bolt Holes
- Gaskets
- Not Included
- Pop. Code
- N
Differential Cover
F15B
33.625in x 23.5in x 11.25in; with 22 Gallon Aft Axle Tank; with Roll-Over Valve
Part Specifications
- US Gallon
- 22
- Liter
- 83
- Length
- 33-5/8 in.
- Width
- 23-1/2 in.
- Height
- 11-1/4 in.
- Kit
- LO03 (Included)
- Strap Set
- ST29 (Not Included)
- Comments
- With Roll Over Valve Hole
- Pop. Code
- C
Fuel Tank
F24C
40in x 17.25in x 10.375in; with Midship Tank
Part Specifications
- US Gallon
- 18
- Liter
- 68
- Length
- 40 in.
- Width
- 17-1/4 in.
- Height
- 10-3/8 in.
- Kit
- LO03 (Included)
- Strap Set
- ST30 (Not Included)
- Comments
- With Roll Over Valve Hole
- Pop. Code
- D
Fuel Tank
FG72A
with Rear Mounted Tank; with 22 Gallon Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Tank Sending Unit
- Outlet
- Butt Flare 5/16 in. Diameter
- Outlet nb.
- 1
- Wires
- 1
- Resistance
- 75-10
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO03
- Pop. Code
- C
Sending Unit Classic
FNH012
with Rear Tank
Part Specifications
- Overall Length
- 10-11/16 in.
- End 1 Inner Diameter
- 2 in.
- End 1 Outer Diameter
- 2-3/8 in.
- End 2 Inner Diameter
- 2 in.
- End 2 Outer Diameter
- 2-3/8 in.
- Pop. Code
- A
Filler Neck Hose
FNH175
Mid Tank
Part Specifications
- Overall Length
- 17-1/2 in.
- End 1 Inner Diameter
- 2 in.
- End 1 Outer Diameter
- 2-3/8 in.
- End 2 Inner Diameter
- 2 in.
- End 2 Outer Diameter
- 2-3/8 in.
- Pop. Code
- B
Filler Neck Hose
FP07B
with California Emissions System; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 9.0945 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 5.7
- Pop. Code
- B
Oil Pan
LO03
with 2in Sending Unit Hole
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 2.6875 In.
- Inside Diameter
- 2.1875 In.
- Pop. Code
- A
Lock Ring
SP1005MP
Part Specifications
- Description
- Mechanical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 20 - 30 gph
- Pressure Range
- 6.3 - 7.8 psi
- Inlet Type
- Butt Flare
- Outlet Type
- Threaded
- Outlet
- 1/2 - 20 UNF
- Gaskets
- Yes
- Pop. Code
- A
Fuel Pump
SP1152
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 54 - 61.9 gph
- Pressure Range
- 5 - 8 psi
- Type
- Centrifugal
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- C
Fuel Pump
ST29
with 22 Gallon Aft Axle Tank
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 31-5/16 In. / St#2 = 31-5/16 In.
- Pop. Code
- D
Strap
ST30
Front Of Rear Axle
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 31-1/8 In. / St#2 = 31-1/8 In.
- Pop. Code
- D
Strap
Strainer
