Evaporator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- K
- Eng. Desg.
- L36
Showing parts 1 to 15 out of 15.
7-3004
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 25-1/4 In.
- Width
- 14-15/16 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
94760
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/8 in.
- Width
- 5-9/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
C-503
Ignition Coil Mounts to Cylinder Head; Qty Req.: 3
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Pin
- Pop. Code
- A
Ignition Coil
CU1485
w/o Bottom Driver Side Hose Connection; w/ TOC (Transmission Oil Cooler); w/ 1-1/4 in. Thick Core; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 24-13/16 In.
- Width
- 17-1/4 In.
- Thickness
- 1 In.
- Inlet Header
- 18-3/4 In. x 2-1/2 In.
- Outlet Header
- 18-3/4 In. x 2-1/2 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- TOC
- Plated
- Pop. Code
- A
Automotive Radiator
GM27114C
33in x 23.375in x 11.375in
Part Specifications
- US Gallon
- 15
- Liter
- 57
- Length
- 33 in.
- Width
- 23-3/8 in.
- Height
- 11-3/8 in.
- Kit
- LO58 (Included)
- Strap Set
- ST23 (Not Included)
- Pop. Code
- D
Fuel Tank
GMP46A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.875 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.3
- Pop. Code
- D
Oil Pan
MP101
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5042
Located In Left Manifold; w/ 4 Electrical Connections Sensor; Located In Right Manifold; w/ 4 Electrical Connections Sensor; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 16-1/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5046
Located In Exhaust Pipe; Position: Upstream; Qty Req.: 1 OR Located After Catalytic Converter; Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 14-3/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5203
Located In Left Manifold; w/ 2 Electrical Connections Sensor; Located In Right Manifold; w/ 2 Electrical Connections Sensor; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Unheated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 14-3/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10127
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
S10145
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Crankshaft Position Sensor
ST23
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 27-3/4 in. / ST#2 = 27-3/4 in.
- Pop. Code
- C
Strap
TR7
3.5in Inside Diameter; without O-Ring; with Plastic Tank
Part Specifications
- Material
- Steel
- Outside Diameter
- 6 in.
- Inside Diameter
- 3-7/16 in.
- Pop. Code
- B
Lock Ring
