Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- 3
- Eng. Desg.
- -
Showing parts 1 to 19 out of 19.
0688863
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- W
Compressor
7-4008
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 30 In.
- Width
- 14-9/16 In.
- Thickness
- 5/8 In.
- Inlet Type
- Male Threaded
- Outlet Type
- Male Threaded
- Pop. Code
- D
Condenser
94480
without Automatic Temperature Control
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-1/8 in.
- Width
- 7-3/4 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- A
Heater
C-614
Pack
Part Specifications
- Ignition Type
- Standard
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- B
Ignition Coil
CU856
30-1/2 in. Between Tanks; w/ EOC (Engine Oil Cooler); w/o Low Coolant indicator; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 30-1/2 In.
- Width
- 17-1/4 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 18-3/4 In. x 2-7/16 In.
- Outlet Header
- 18-3/4 In. x 2-7/16 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-9/16 In.
- EOC
- Plated
- TOC
- Plated
- Pop. Code
- C
Automotive Radiator
FG07G
Drive Type: FWD
Part Specifications
- Description
- Fuel Tank Sending Unit
- Inlet
- Inverted Flare 5/16 in. Diameter
- Outlet
- Inverted Flare 3/8 in. Diameter
- Outlet nb.
- 1
- Wires
- 5
- Resistance
- 0-175
- Strainers
- Not Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO01
- Pop. Code
- W
Sending Unit 
FN601
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/2 in.
- Length
- 27 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FNH016
Part Specifications
- Overall Length
- 10-3/8 in.
- End 1 Inner Diameter
- 1-1/2 in.
- End 1 Outer Diameter
- 1-13/16 in.
- End 2 Inner Diameter
- 1-1/2 in.
- End 2 Outer Diameter
- 1-13/16 in.
- Pop. Code
- B
Filler Neck Hose
GM20B
40.125in x 28.5in x 11.5in
Part Specifications
- US Gallon
- 18
- Liter
- 68
- Length
- 40-1/8 in.
- Width
- 28-1/2 in.
- Height
- 11-1/2 in.
- Kit
- LO01 (Included)
- Strap Set
- ST22 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- A
Fuel Tank
GMP89A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.0625 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 4.7
- Pop. Code
- D
Oil Pan
LO01
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 3-7/8 in.
- Inside Diameter
- 3-1/8 in.
- Pop. Code
- A
Lock Ring
MP123
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- C
Manifold Absolute Pressure Sensor
OS5048
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Unheated
- Sensor Type
- Zirconia
- Connector Shape
- Oval
- Connector Gender
- Male
- Terminal Count
- 2
- Overall Length
- 15-3/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1120
In Fuel Tank; with 1.4375in Diameter Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 43.3 - 52.6 gph
- Pressure Range
- 72.5 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP1136
with 2in Diameter Pump; with Threaded Terminal; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 87 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
Strap
STR03
w/ 1.45 in. Diameter Pump
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- A
Strainer 
STR68
w/ 2 in. Diameter Pump; w/ Threaded Terminals
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- D
Strainer 