Compresseur
Recherche de pièces
ou
Résultats de recherche
- Essence
- DIESEL
- Alimentation d’essence
- FI
- ASP.
- T
- NIV moteur
- -
- Désignation moteur
- ISB 6.7
Pièces 1 à 6 sur 6.
2001-1771
with 36in x 27.5in x 2.1875in Core; without Transmission Oil Cooler; Inlet 2 in. Upper Right Side.; Outlet 2 in. Lower Left Side
Spécifications
- Mat. faisceau
- Aluminum
- Mat. réservoir
- Aluminum
- Type
- Downflow
- Rangée
- 2
- Hauteur
- 36 In.
- Largeur
- 27-5/8 In.
- Épaisseur
- 2-3/16 In.
- Entrée
- 2 In.
- Sortie
- 2 In.
- Supports de radiateur inclus
- No
- Trousse
- 2x Instruction Sheets; 2x Clevis Pins; 2xC levis Clips; 8x Screws(HM6x1-16); 8x Clip Nuts(M6x1); 8x Washers(1/4" I.D); 4x Hex Cap Screws(3/8-16 x 1); 1x Elbow(1/4-18 NPT For Hose 3/8"); 1 Drain Cock(1/4-18 NPT); 1 Adapter(1/4-18 Male x 1/4-18 Female)
- Code pop.
- W
Radiateur HD
7-9100
without Receiver Drier; with 19.375in x 12.875in x 0.875in Core; Inlet Fitting Block Style / Outlet Fitting Block Style
Spécifications
- Type
- Parallel Flow
- Hauteur
- 19-3/8 In.
- Largeur
- 12-7/8 In.
- Épaisseur
- 7/8 In.
- Type d'entrée
- Block Fitting
- Type de sortie
- Block Fitting
- Code pop.
- D
Condenseur industriel
7-9105
with Receiver Drier; with 24in x 16.125in x 0.875in Core; Inlet Fitting #8 Male O-Ring / Outlet Fitting #6 Male O-Ring
Spécifications
- Type
- Parallel Flow
- Hauteur
- 24 In.
- Largeur
- 16-1/8 In.
- Épaisseur
- 7/8 In.
- Type d'entrée
- Male Threaded
- Type de sortie
- Male Threaded
- Code pop.
- W
Condenseur industriel
CMP06A
Replaces OE Part Number(s) 3958209; Failure to use the vehicle OEM approved sealing method will void the warranty.; EPA 17; Gasket And/Or Sealant Not Included; Position: Front Sump; Qty Req.: 1
Spécifications
- Mat. faisceau
- Cold Rolled Steel (EDDQ)
- Hauteur
- 7.7953 In.
- Filetage du bouchon de vidange
- M18 - 1.5
- Litre
- 14
- Code pop.
- A
Carter d'huile
CMP10A
Replaces OE Part Number(s) 4898036 / 4898037; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included; Position: Rear Sump; Qty Req.: 1 OR Replaces OE Part Number(s) 4898036 / 4898037; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included; Position: Front Sump; Qty Req.: 1
Spécifications
- Mat. faisceau
- Steel
- Hauteur
- 7.7953 In.
- Filetage du bouchon de vidange
- M18 - 1.5
- Litre
- 18.93
- Code pop.
- N
Carter d'huile
