0234002
Aluminum
Spécifications
- Mat. faisceau
- Aluminum
- Longueur
- 7.0625 in.
- Diamètre
- 3 in.
- Entrée
- 0.8125 in.
- Code pop.
- N
Accumulateur
Recherche de pièces
ou
Résultats de recherche
- Essence
- DIESEL
- Alimentation d’essence
- FI
- ASP.
- T
- NIV moteur
- -
- Désignation moteur
- MaxxForce 10
Pièces 1 à 9 sur 9.
2001-3545
with 35.4375in x 39.5in x 2.1875in Core; Inlet 2.5 in Upper Left Side.; Outlet 2.5 in Lower Righ Side Pointing Downward; High Temperature Radiator; w/ Transmission Oil Cooler on Gril Side
Spécifications
- Mat. faisceau
- Aluminum
- Mat. réservoir
- Aluminum
- Type
- Downflow
- Rangée
- 2
- Hauteur
- 35-3/8 In.
- Largeur
- 39-1/2 In.
- Épaisseur
- 2-3/16 In.
- Entrée
- 2-1/4 In.
- Sortie
- 2-1/2 In.
- RHT (TOC)
- 12 In. Grid side
- Supports de radiateur inclus
- No
- Trousse
- 2x Instructions Sheets; 2x Clevis Pins; 2x Clevis Clips; 4x Screws(3/8-16 x 1)
- Code pop.
- W
Radiateur HD
2001-3547
with 35.0625in x 40.4375in x 2.1875in Core; 2.5in Inlet and Outlet; with Transmission Oil Cooler; Inlet is 9 ft. ft. From Tank End; Must Re-Use OEM Frame; Frame Differ Between Transtar And Workstar; No Frame Included; OEM Frame Must Be Reused.
Spécifications
- Mat. faisceau
- Aluminum
- Mat. réservoir
- Aluminum
- Type
- Downflow
- Rangée
- 2
- Hauteur
- 35-1/16 In.
- Largeur
- 40-1/2 In.
- Épaisseur
- 2-3/16 In.
- Entrée
- 2-1/2 In.
- Sortie
- 2-3/8 In.
- RHT (TOC)
- 11-1/2 In. Bottom tank
- Supports de radiateur inclus
- No
- Trousse
- 1x Instruction Sheet; 2x Elbows(1/4-18 NPT); 1x Spill Proof Fitting, 2x Fittings
- Code pop.
- D
Radiateur HD
4401-3512
with 32.0625in x 9.5in x 3.9375in Core; with 3.5in Inlet; with 3.5in Outlets
Spécifications
- Application
- International
- Type
- Tube & Fin
- Hauteur
- 33-1/16 In.
- Largeur
- 9-1/2 In.
- Épaisseur
- 3-15/16 In.
- Entrée
- 3-1/2 In.
- Sortie
- 3-1/2 In.
- Code pop.
- C
Refroidisseur d'air de suralimentation
7-9073
without Receiver Drier; with 20.625in x 23.125in x 0.625in Core; Inlet Fitting Block Style / Outlet Fitting Block Style
Spécifications
- Type
- Parallel Flow
- Hauteur
- 20-5/8 In.
- Largeur
- 23-1/8 In.
- Épaisseur
- 5/8 In.
- Type d'entrée
- Block Fitting
- Type de sortie
- Block Fitting
- Code pop.
- C
Condenseur industriel
7-9075
without Receiver Drier; with 32.6875in x 15.5625in x 0.625in Core; Inlet Fitting Block Style / Outlet Fitting Block Style
Spécifications
- Type
- Parallel Flow
- Hauteur
- 32-11/16 In.
- Largeur
- 15-9/16 In.
- Épaisseur
- 5/8 In.
- Type d'entrée
- Block Fitting
- Type de sortie
- Block Fitting
- Code pop.
- A
Condenseur industriel
99438
with Bergstrom A/C System; with 11.8125in x 6.9375in x 1.625in Core; with 0.625in Diameter Inlet; with 0.75in Diameter Outlet; Front Heater
Spécifications
- Mat. faisceau
- Aluminum
- Mat. réservoir
- Aluminum
- Hauteur
- 11-13/16 in.
- Largeur
- 6-15/16 in.
- Épaisseur
- 1-5/8 in.
- Entrée
- 5/8 in. Diameter
- Sortie
- 3/4 in. Diameter
- Code pop.
- D
Chaufferette industrielle
DTP07A
Replaces OE Part Number(s) 1832248C91, 1832249C91, 1832249C92, 180134C91, 1842117C91, 1842118C91, 1876974C91, 1876974C92, 7078044C91, 7078366C91; Failure to use the vehicle OEM approved sealing method will void the warranty.; Front Or Rear Sump; Gasket And/Or Sealant Not Included
Spécifications
- Mat. faisceau
- Steel
- Hauteur
- 10.6299 In.
- Filetage du bouchon de vidange
- M18 - 1.5
- Litre
- 28.39
- Code pop.
- C
Carter d'huile
ST560
For 50 to 60 Gallons Square Tank
Spécifications
- Commentaires
- Includes 1 Strap; St#1 = 41-3/8 In
- Code pop.
- D
Courroie
