ou
Résultats de recherche
- Essence
- DIESEL
- Alimentation d’essence
- FI
- ASP.
- T
- NIV moteur
- T
- Désignation moteur
- -
Pièces 1 à 12 sur 12.
94700
Spécifications
- Mat. faisceau
- Aluminum
- Mat. réservoir
- Aluminum
- Hauteur
- 7-3/8 in.
- Largeur
- 5-7/16 in.
- Épaisseur
- 1-1/4 in.
- Entrée
- 5/8 in. Diameter
- Sortie
- 5/8 in. Diameter
- Code pop.
- A
F10B
29.25in x 24.625in x 13.875in
Spécifications
- Gallon US
- 23
- Litre
- 87
- Longueur
- 29-1/4 in.
- Largeur
- 24-5/8 in.
- Hauteur
- 13-7/8 in.
- Trousse
- LO04 (Included)
- Courroies
- ST28 (Not Included)
- Commentaires
- Large Gauge Hole 3 5/8 "
- Code pop.
- A
FP08A
without Sensor Hole; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Spécifications
- Mat. faisceau
- Cold Rolled Steel (EDDQ)
- Hauteur
- 6.1875 in
- Filetage du bouchon de vidange
- M14 X 1.5
- Litre
- 4.8
- Code pop.
- D
FP08B
with Sensor Hole; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Spécifications
- Mat. faisceau
- Cold Rolled Steel (EDDQ)
- Hauteur
- 6.1875 in
- Filetage du bouchon de vidange
- M14 X 1.5
- Litre
- 4.8
- Code pop.
- D
LO04
with Large Gauge - 3.625in; with O-Ring
Spécifications
- Mat. faisceau
- Steel / Polymer
- Diamètre extérieur
- 4-11/16 in.
- Diamètre intérieur
- 3-7/8 in.
- Code pop.
- A
SP1121
Externally Mounted; High Pressure Pump; 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Spécifications
- Description
- Electrical Fuel Pump
- Type de carb.
- Gas
- Débit
- 51 - 60.3 gph
- Variation de pression
- 116 - 159.5 psi
- Type
- Rollervane
- Type d'entrée
- Quick Connect
- Type de sortie
- Quick Connect
- Tension
- 12
- Joints d'étanchéité
- No
- Crépines
- No
- Code pop.
- A
SP1167
In-Tank High Pressure Pump; 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Spécifications
- Description
- Electrical Fuel Pump
- Type de carb.
- Gas
- Débit
- 28 - 40 gph
- Variation de pression
- 3.6 - 7.2 psi
- Type
- Turbine
- Type d'entrée
- Strainer
- Type de sortie
- Hose
- Tension
- 12
- Joints d'étanchéité
- Yes
- Crépines
- No
- Code pop.
- B
TP0831
Drive Type: 4WD; Transmission Mfr Code: A4LD; Transmission Control Type: Automatic
Spécifications
- Code pop.
- N