Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- S
- Eng. Desg.
- -
Showing parts 1 to 19 out of 19.
Accumulator
0610105
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
1054188
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 9-13/16 in.
- Width
- 10 in.
- Thickness
- 3-1/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 9/16 in. OD
- Outlet
- 11/16 in. OD
- Pop. Code
- B
Evaporator
93024
Aluminum
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8 in.
- Width
- 7-3/8 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- A
Heater
C-586
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- A
Ignition Coil
CRP06A
without Sensor Hole; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 8.8125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 5.7
- Pop. Code
- A
Oil Pan
CU2101
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 18-1/8 In.
- Width
- 19-7/16 In.
- Thickness
- 1 In.
- Inlet Header
- 20 In. x 2-7/16 In.
- Outlet Header
- 20 In. x 2-7/16 In.
- Inlet
- 1-1/4 In.
- Outlet
- 1-1/2 In.
- TOC
- Plated
- Pop. Code
- B
Automotive Radiator
MP106
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- B
Manifold Absolute Pressure Sensor
OS5077
Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 18-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5081
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 18-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10074
Transmission Control Type: Manual
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- B
Crankshaft Position Sensor
S10087
Transmission Control Type: Automatic
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Crankshaft Position Sensor
SP1132
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP7115M
with 19 Gallon Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 48-54 psi
- Flow Rate
- 45-51 gph
- Resistance
- 270-20 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
SP7122M
with 15 Gallon Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 48-54 psi
- Flow Rate
- 45-51 gph
- Resistance
- 270-20 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST358
w/o Plastic Block
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 24-1/4 in. / ST#2 = 24-1/4 in.
- Pop. Code
- C
Strap
STR63
On Pump; When Replacing The Pump Only Both Strainers Are Required
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- B
Strainer 
STR72
On Module; When Replacing The Pump Only; Both Strainers Are Required
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- C
Strainer 