0610377
with Clutch; 7SBH17 Compressor
Part Specifications
- Pulley Diameter
- 4-1/2 in.
- Grooves
- 4
- Clutch Included
- Yes
- Pop. Code
- N
Compressor
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- Duratec 25
Showing parts 1 to 20 out of 20.
1010240
with Automatic Temperature Control; Position: Front; Qty Req.: 1
Part Specifications
- Height
- 10-13/16 in.
- Width
- 9-7/16 in.
- Thickness
- 1-1/2 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 1/2 in. OD
- Outlet
- 5/8 in. OD
- Pop. Code
- D
Evaporator
7-4214
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 23-5/8 In.
- Width
- 18 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
98125
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-5/8 in.
- Width
- 10-3/16 in.
- Thickness
- 1 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- D
Heater
C-757
Ignition Coil Mounts to Cylinder Head; Qty Req.: 4
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- D
Ignition Coil
CU13321
Main Radiator
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 26-3/8 In.
- Width
- 17-9/16 In.
- Thickness
- 1 In.
- Inlet Header
- 18-3/4 In. x 1-13/16 In.
- Outlet Header
- 18-3/4 In. x 1-13/16 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- Pop. Code
- C
Automotive Radiator
Fuel Pump Driver Module 
FN1130
Drive Type: FWD
Part Specifications
- Cup Type
- Capless
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 36 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- A
Filler Neck
Filler Neck Accessory
FP81A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 4.9375 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 5.4
- Pop. Code
- B
Oil Pan
LO164
without O-Ring
Part Specifications
- Material
- Steel
- Outside Diameter
- 7-3/8 in.
- Inside Diameter
- 4-15/16 in.
- Pop. Code
- A
Lock Ring
LO186
Part Specifications
- Material
- Polymer
- Outside Diameter
- 3/16 in.
- Inside Diameter
- 5-1/4 in.
- Pop. Code
- A
Lock Ring
LO187
with O-Ring
Part Specifications
- Material
- Steel
- Outside Diameter
- 7-3/8 in.
- Inside Diameter
- 4-15/16 in.
- Pop. Code
- A
Lock Ring
MA278
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 5
- Pop. Code
- B
Mass Airflow Sensor
MP127
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 4
- Pop. Code
- C
Manifold Absolute Pressure Sensor
S10407
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
SP2502M
Clean Fuel Fleet Vehicle; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 58-64 psi
- Flow Rate
- 55-65 gph
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST461
Drive Type: AWD
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 35-3/8 in / ST#2 = 35-1/4 in
- Pop. Code
- W
Strap
ST462
Drive Type: FWD
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 29-3/8 in / ST#2 = 35-1/4 in
- Pop. Code
- D
Strap
TB1030
Part Specifications
- Length
- 5-3/4 In.
- Length
- 5-3/4 In.
- Width
- 5-3/16 In.
- Width
- 5-3/16 In.
- Connector
- 6 Pin Male
- Connector
- 6 Pin Male
- Inside Diameter
- 2-3/8 In. (60 mm)
- Inside Diameter
- 2-3/8 In. (60 mm)
- Pop. Code
- C
Electronic Throttle Body
