Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- H
- Eng. Desg.
- -
Showing parts 1 to 21 out of 21.
Compressor
1010255
Part Specifications
- Height
- 8-15/16 in.
- Width
- 10-7/8 in.
- Thickness
- 1-5/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 9/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- B
Evaporator
7-4519
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 23-1/16 In.
- Width
- 15-9/16 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- B
Condenser
98149
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-5/16 in.
- Width
- 8-1/16 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- C
Heater
C-985
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU13609
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 24 In.
- Width
- 15-11/16 In.
- Thickness
- 5/8 In.
- Inlet Header
- 16-3/4 In. x 1-15/16 In.
- Outlet Header
- 16-3/4 In. x 1-15/16 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- Pop. Code
- C
Automotive Radiator
FN1147
USA Built
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/16 in.
- Length
- 26 in.
- Vent Quantity
- 0
- Pop. Code
- C
Filler Neck
FNH199
Korean Built
Part Specifications
- Overall Length
- 7-5/16 in.
- End 1 Inner Diameter
- 1-3/16 in.
- End 1 Outer Diameter
- 1-7/16 in.
- End 2 Inner Diameter
- 7/8 in.
- End 2 Outer Diameter
- 1-1/4 in.
- Pop. Code
- D
Filler Neck Hose
HYP32A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 4.3125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4
- Pop. Code
- A
Oil Pan
LO186
Part Specifications
- Material
- Polymer
- Outside Diameter
- 3/16 in.
- Inside Diameter
- 5-1/4 in.
- Pop. Code
- A
Lock Ring
Manifold Absolute Pressure Sensor
OS5493
Body Type: Sedan; Bank 1 Sensor 1; w/ 5 Wires; Position: Upstream; Qty Req.: 1
Part Specifications
- Pop. Code
- W
Oxygen Sensor
OS6146
Body Type: Sedan; Bank 1 Sensor 2; Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- THIMBLE
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 26-3/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10212
Qty Req.: 2
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Camshaft Position Sensor
S10362
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- A
Crankshaft Position Sensor
SP3049M
Except Partial Zero Emissions Vehicle (PZEV); Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 5/16 in. Diameter
- Pressure Range
- 70-75 psi
- Flow Rate
- 49-59 gph
- Resistance
- 200-8 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
ST446
USA Built
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 32-3/4 in. / ST#2 = 33-1/4 in.
- Pop. Code
- D
Strap
TB1165
Part Specifications
- Length
- 6-1/2 In.
- Width
- 4-15/16 In.
- Connector
- 6 Pin Male
- Inside Diameter
- 2-3/8 In. (60 mm)
- Pop. Code
- C
Electronic Throttle Body
TP0856
Transmission Control Type: Automatic; Unit designed as direct replacement for plastic oil pan, use longer bolts when replacing steel pan.
Part Specifications
- Material
- Plastic
- Height
- 2.5000 in.
- Comments
- Drain plug included
- Pop. Code
- N
Transmission Oil Pan
VTS1075
Position: Exhaust; Qty Req.: 1
Part Specifications
- Length
- 2-5/8 In.
- Width
- 1-3/4 In.
- Connector Quantity
- 1
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Variable Valve Timing Solenoid
