Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- R
- Eng. Desg.
- -
Showing parts 1 to 22 out of 22.
7-3678
without Receiver Drier; with Oil Cooler
Part Specifications
- Type
- Parallel Flow
- Height
- 26-7/16 In.
- Width
- 16-3/4 In.
- Thickness
- 11/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Condenser
98000
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 9-5/8 in.
- Width
- 6 in.
- Thickness
- 1-3/16 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- B
Heater
C-720
Ignition Coil Mounts to Cylinder Head; Qty Req.: 6
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- A
Ignition Coil
CU2937
17-1/2 in. Core Width (From Top to Bottom Coolant Tubes)
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 28-3/4 In.
- Width
- 17-1/4 In.
- Thickness
- 1 In.
- Inlet Header
- 18-3/4 In. x 1-15/16 In.
- Outlet Header
- 18-3/4 In. x 1-15/16 In.
- Inlet
- 1-1/2 In.
- Outlet
- 1-1/2 In.
- Pop. Code
- B
Automotive Radiator
Fuel Pump Driver Module 
FN731
Part Specifications
- Cup Type
- Capless
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 33-1/2 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- B
Filler Neck
Filler Neck Accessory
FP69A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 5.4375 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 5.2
- Pop. Code
- B
Oil Pan
LO186
Part Specifications
- Material
- Polymer
- Outside Diameter
- 3/16 in.
- Inside Diameter
- 5-1/4 in.
- Pop. Code
- A
Lock Ring
MA147
Region: USA; Sensor Only OR Region: CAN; Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Spade
- Terminal Count
- 6
- Pop. Code
- A
Mass Airflow Sensor
OS5037
Bank 1 Sensor 2; Position: Downstream Right; Qty Req.: 1 OR Bank 2 Sensor 2; Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 17-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5493
Bank 1 Sensor 1; w/ 5 Wires; Position: Upstream Right; Qty Req.: 1 OR Bank 2 Sensor 1; w/ 5 Wires; Position: Upstream Left; Qty Req.: 1
Part Specifications
- Pop. Code
- W
Oxygen Sensor
S10358
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- A
Crankshaft Position Sensor
S10423
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP1381
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 63-73 gph
- Pressure Range
- 79.7 - 123.3 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP2118M
Drive Type: FWD; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 61-67 psi
- Flow Rate
- 53-62 gph
- Resistance
- 180-10 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
SP2119M
Drive Type: AWD; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 61-67 psi
- Flow Rate
- 53-62 gph
- Resistance
- 180-10 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST441
Drive Type: FWD
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 38-3/4 in. / ST#2 = 42 in.
- Pop. Code
- W
Strap
ST442
Drive Type: AWD
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 42-1/2 in. / ST#2 = 42 in.
- Pop. Code
- W
Strap
Strainer 
TB1037
Part Specifications
- Length
- 6-11/16 In.
- Width
- 5-1/2 In.
- Connector
- 6 Pin Male
- Inside Diameter
- 2-9/16 In. (65 mm)
- Pop. Code
- D
Electronic Throttle Body
