Accumulator
or
Search Results
- Fuel
- FULL HYBRID EV-GAS (FHEV)
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- D
- Eng. Desg.
- -
Showing parts 1 to 21 out of 21.
0610307
Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 3-5/16 in.
- Grooves
- 6
- Pop. Code
- B
Compressor
1010243
Part Specifications
- Height
- 10-7/8 in.
- Width
- 10-1/16 in.
- Thickness
- 1-1/2 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 9/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- D
Evaporator
7-3983
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 27-3/8 In.
- Width
- 15 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Condenser
98153
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-5/16 in.
- Width
- 8-3/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- C
Heater
CU13478
Auxiliary Radiator
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 25-1/16 In.
- Width
- 2-5/16 In.
- Thickness
- 1 In.
- Inlet Header
- 3-1/16 In. x 1-7/8 In.
- Outlet Header
- 3-1/16 In. x 1-7/8 In.
- Inlet
- 11/16 In.
- Outlet
- 11/16 In.
- Pop. Code
- D
Automotive Radiator
CU13531
Main Radiator
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 25 In.
- Width
- 18-11/16 In.
- Thickness
- 9/16 In.
- Inlet Header
- 19-1/2 In. x 1-15/16 In.
- Outlet Header
- 19-1/2 In. x 1-15/16 In.
- Inlet
- 1-3/8 In.
- Outlet
- 1-3/8 In.
- Pop. Code
- D
Automotive Radiator
FI1555
Part Specifications
- Description
- Fuel Injection Pump
- Fuel Type
- Gas
- Inlet
- 5/16
- Inlet Type
- Quick connect
- Outlet
- M14-1.5
- Outlet Type
- Threaded
- Pop. Code
- B
Fuel Injection Pump 
FN1143
Korean Built
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-5/16 in.
- Length
- 27 in.
- Vent Quantity
- 0
- Pop. Code
- C
Filler Neck
FN1144
USA Built
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/16 in.
- Length
- 27-1/2 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FNH255
Part Specifications
- Overall Length
- 8-9/16 in.
- End 1 Inner Diameter
- 1-5/16 in.
- End 1 Outer Diameter
- 1-5/8 in.
- End 2 Inner Diameter
- 1-1/16 in.
- End 2 Outer Diameter
- 1-3/8 in.
- Pop. Code
- N
Filler Neck Hose
HYP05B
with 22 Bolt Holes; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 4.3125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4
- Pop. Code
- A
Oil Pan
HYP23A
with 23 Bolt Holes; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 4.125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.7
- Pop. Code
- A
Oil Pan
LO219
USA Built
Part Specifications
- Material
- Steel
- Outside Diameter
- 6-9/16 in.
- Inside Diameter
- 4-7/16 in.
- Pop. Code
- B
Lock Ring
Manifold Absolute Pressure Sensor
OS5564
Bank 1 Sensor 2; Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 24-13/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10230
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP1392
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 48.3 - 57.6 gph
- Pressure Range
- 80 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
Strap
Strainer 
VTS1050
Position: Intake; Qty Req.: 1
Part Specifications
- Length
- 1-15/16 In.
- Width
- 1 In.
- Connector Quantity
- 1
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Variable Valve Timing Solenoid
