Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- GA16DE
Showing parts 1 to 13 out of 13.
Evaporator
7-4980
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 28 In.
- Width
- 12.0625 In.
- Thickness
- 0.75 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Condenser
99342
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-1/4 in.
- Width
- 8-7/8 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- D
Heater
CU1317
Region: MEX; with Air Conditioning; with Heavy Duty Cooling; with 7.875in Transmission Oil Cooler; Radiator Cap Is Required; Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 12.625 In.
- Width
- 25.5 In.
- Thickness
- 1 In.
- Inlet Header
- 26.3125 In.
- Outlet Header
- 26.3125 In.
- Inlet
- 1.125 In.
- Outlet
- 1.125 In.
- TOC
- Concentric
- Pop. Code
- W
Automotive Radiator
CU1426M
Region: MEX; with Heavy Duty Cooling; with 11.875in Transmission Oil Cooler; Radiator Cap Is Required; Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 12.625 In.
- Width
- 25.5 In.
- Thickness
- 1 In.
- Inlet
- 1.125 In.
- Outlet
- 1.125 In.
- Pop. Code
- N
Automotive Radiator
FN753
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1 in.
- Length
- 27 in.
- Vent 1
- 5/8 in.
- Vent 2
- 1/4 in.
- Vent 3
- 1/4 in.
- Vent 4
- 1/4 in.
- Vent Quantity
- 4
- Pop. Code
- D
Filler Neck
LO165
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 6 In.
- Inside Diameter
- 4.3125 In.
- Pop. Code
- A
Lock Ring
MA334
Sensor Module with Housing
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- D
Mass Airflow Sensor
NSP01A
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.5118 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 3.2
- Pop. Code
- D
Oil Pan
SP1118
In Fuel Tank; Japan Built; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 45 - 54.2 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump
ST315
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 31-3/4 In. / St#2 = 30-1/4 In.
- Pop. Code
- C
Strap
Strainer
