Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- R
- Eng. Desg.
- -
Showing parts 1 to 20 out of 20.
0610043
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 5-5/16 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
Evaporator
Evaporator
7-3320
without Receiver Drier; with Oil Cooler
Part Specifications
- Type
- Parallel Flow
- Height
- 29-5/8 In.
- Width
- 17-1/4 In.
- Thickness
- 11/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- B
Condenser
93019
To 07/09/2004; Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Height
- 11-1/8 in.
- Width
- 7-3/16 in.
- Thickness
- 1-11/16 in.
- Inlet
- 9/16 in. Diameter
- Outlet
- 9/16 in. Diameter
- Comments
- O-Rings Not included
- Pop. Code
- B
Heater
93023
To 07/09/2004; Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Height
- 6-3/4 in.
- Width
- 6-1/4 in.
- Thickness
- 1-5/8 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heater
99328
From 07/09/2004; Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7 in.
- Width
- 6-3/8 in.
- Thickness
- 1 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
99333
From 07/09/2004; Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 10-5/8 in.
- Width
- 7-3/8 in.
- Thickness
- 1-1/16 in.
- Inlet
- 1-1/8 in. Diameter
- Outlet
- 1-1/8 in. Diameter
- Comments
- Requires the use of OEM pipes
- Pop. Code
- A
Heater
C-595
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CRP05A
without Sensor Hole; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.3125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.3
- Pop. Code
- A
Oil Pan
CU2795
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 30-5/16 In.
- Width
- 16-1/16 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 17-3/8 In. x 2-5/16 In.
- Outlet Header
- 17-3/8 In. x 2-5/16 In.
- Inlet
- 1-1/2 In.
- Outlet
- 1-9/16 In.
- Pop. Code
- A
Automotive Radiator
OS5092
Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Rectangular
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 18-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5263
w/o Mid Model Year Update; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Rectangular
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 20-1/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
Camshaft Position Sensor
S10179
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Crankshaft Position Sensor
SP1181
Stow and Go Seats; Strainer Included w/ Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 57.2 - 66.5 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- Yes
- Pop. Code
- B
Fuel Pump 
SP7008M
Stow and Go Seats; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 57-62 psi
- Flow Rate
- 49-59 gph
- Resistance
- 1058-71 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
SP7172M
Except Stow and Go Seats; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 57-62 psi
- Flow Rate
- 31-40 gph
- Resistance
- 1050-70 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST306
w/ Stow & Go Seating
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 41-3/4 in. / ST#2 = 43-3/4 in. (with stow and go seat)
- Pop. Code
- C
Strap
