Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- Y
- Eng. Desg.
- ECC
Showing parts 1 to 18 out of 18.
0658344
New; with Clutch; 10PA17C Compressor; May require use of OE Connector; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 5-9/16 in.
- Grooves
- 1
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
Evaporator
7-4602
without Receiver Drier; USA Built
Part Specifications
- Type
- Serpentine
- Height
- 25-3/16 In.
- Width
- 11-1/16 In.
- Thickness
- 1 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
93013
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Height
- 8-3/8 in.
- Width
- 6-3/16 in.
- Thickness
- 1-5/8 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-570
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Ignition Coil
CR17A
18.75in x 33in x 8.5in; with Steel Tank
Part Specifications
- US Gallon
- 12.5
- Liter
- 47
- Length
- 18-3/4 in.
- Width
- 33 in.
- Height
- 8-1/2 in.
- Kit
- LO12 (Included)
- Strap Set
- ST133 (Not Included)
- Comments
- Steel Tank Only
- Pop. Code
- D
Fuel Tank
CRP08A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.3125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.3
- Pop. Code
- W
Oil Pan
CU1548
w/ A/C; 11-7/8 in. x 23-7/8 in. Core; Top Middle Fan Mounts 7 in. Apart
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 11-7/8 In.
- Width
- 23-5/8 In.
- Thickness
- 5/8 In.
- Inlet Header
- 24-3/4 In. x 1-5/8 In.
- Outlet Header
- 24-3/4 In. x 1-5/8 In.
- Inlet
- 1-1/4 In.
- Outlet
- 1-1/4 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
CU1623
w/o A/C; 11 in. x 15-1/4 in. Core
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 15-1/4 In.
- Width
- 11-1/16 In.
- Thickness
- 11/16 In.
- Inlet Header
- 16-1/4 In. x 1-13/16 In.
- Outlet Header
- 16-1/4 In. x 1-13/16 In.
- Inlet
- 1-1/4 In.
- Outlet
- 1-1/4 In.
- TOC
- Concentric
- Pop. Code
- W
Automotive Radiator
CU2196
w/ A/C; 11-5/8 in. x 24-7/8 in. Core; Top Middle Fan Mounts 3-1/4 in. Apart
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 11-5/8 In.
- Width
- 24-7/8 In.
- Thickness
- 5/8 In.
- Inlet Header
- 26-1/16 In. x 2 In.
- Outlet Header
- 26-1/16 In. x 2 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- TOC
- Concentric
- Pop. Code
- W
Automotive Radiator
FN505
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-3/4 in.
- Length
- 28-3/4 in.
- Vent 1
- 5/8 in.
- Vent 2
- 1-1/4 in.
- Vent Quantity
- 2
- Pop. Code
- C
Filler Neck
FNH006
Part Specifications
- Overall Length
- 8-3/8 in.
- End 1 Inner Diameter
- 1-3/4 in.
- End 1 Outer Diameter
- 2 in.
- End 2 Inner Diameter
- 1-3/4 in.
- End 2 Outer Diameter
- 2 in.
- Pop. Code
- C
Filler Neck Hose
LO12
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4-5/8 in.
- Inside Diameter
- 3-3/4 in.
- Pop. Code
- D
Lock Ring
OS5071
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 24-3/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP8044M
with Plastic Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 46-52 psi
- Flow Rate
- 49-61 gph
- Resistance
- 1050-70 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST133
Steel Tank
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 25-1/2 in. / ST#2 = 24 in.
- Pop. Code
- D
Strap
ST166
Plastic Tank; Bolts; O-ring and Lock Washer Included
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 25-3/4 in. / ST#2 = 24-1/2 in. COMES WITH BOLTS
- Pop. Code
- D
Strap
