0610279
Front Unit; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-1/2 in.
- Grooves
- 6
- Pop. Code
- B
Compressor
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- H
- Eng. Desg.
- -
Showing parts 1 to 13 out of 13.
1010207
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 12-1/16 in.
- Width
- 7-7/8 in.
- Thickness
- 2-9/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 5/8 in. OD
- Pop. Code
- B
Evaporator
1054887
Position: Rear; Qty Req.: 1
Part Specifications
- Height
- 9-5/16 in.
- Width
- 5-1/2 in.
- Thickness
- 2-3/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- B
Evaporator
7-3682
without Receiver Drier; with Oil Cooler
Part Specifications
- Type
- Parallel Flow
- Height
- 25-3/8 In.
- Width
- 20-3/16 In.
- Thickness
- 11/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- A
Condenser
99328
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7 in.
- Width
- 6-3/8 in.
- Thickness
- 1 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
99333
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 10-5/8 in.
- Width
- 7-3/8 in.
- Thickness
- 1-1/16 in.
- Inlet
- 1-1/8 in. Diameter
- Outlet
- 1-1/8 in. Diameter
- Comments
- Requires the use of OEM pipes
- Pop. Code
- A
Heater
C-595
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CRP05A
without Sensor Hole; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 5.3125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.3
- Pop. Code
- A
Oil Pan
CU13063
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 24-1/16 In.
- Width
- 20-11/16 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 21-7/8 In. x 2-5/16 In.
- Outlet Header
- 21-7/8 In. x 2-5/16 In.
- Inlet
- 1-9/16 In.
- Outlet
- 1-9/16 In.
- Pop. Code
- A
Automotive Radiator
FN1005
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1 in.
- Length
- 31-1/2 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- B
Filler Neck
SP7057M
In Fuel Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Flex / Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 58-64 psi
- Flow Rate
- 60-69 gph
- Resistance
- 990-50 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
ST306
w/ Stow & Go Seating
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 41-3/4 in. / ST#2 = 43-3/4 in. (with stow and go seat)
- Pop. Code
- C
Strap
TP0832
Transmission Control Type: Automatic; Transmission Num Speeds: 4; Region: MEX; Lower Pan
Part Specifications
- Pop. Code
- N
Transmission Oil Pan
