Evaporator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- Z
- Eng. Desg.
- LB4
Showing parts 1 to 13 out of 13.
7-3219
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 24 In.
- Width
- 15-9/16 In.
- Thickness
- 13/16 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- A
Condenser
94501
with Air Conditioning
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 10-1/8 in.
- Width
- 5-5/8 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- A
Heater
94530
without Air Conditioning
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-7/8 in.
- Width
- 6 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- A
Heater
C-611
Pack
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Female
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- A
Ignition Coil
FN11
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2 in.
- Length
- 14-1/4 in.
- Vent Quantity
- 0
- Pop. Code
- C
Filler Neck
GM411B
39.75in x 26.5in x 10in; with Filler Neck
Part Specifications
- US Gallon
- 24
- Liter
- 91
- Length
- 39-3/4 in.
- Width
- 26-1/2 in.
- Height
- 10 in.
- Kit
- LO01 (Included)
- Strap Set
- ST09 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- B
Fuel Tank
GM4B
39.75in x 26.5in x 10in; without Filler Neck
Part Specifications
- US Gallon
- 24
- Liter
- 91
- Length
- 39-3/4 in.
- Width
- 26-1/2 in.
- Height
- 10 in.
- Kit
- LO01 (Included)
- Strap Set
- ST09 (Not Included)
- Comments
- Depth Of Bottom Half 5"; W/ Pan In Tank
- Pop. Code
- D
Fuel Tank
LO01
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 3-7/8 in.
- Inside Diameter
- 3-1/8 in.
- Pop. Code
- A
Lock Ring
OS5319
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 18-1/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1114
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 43.3 - 49.5 gph
- Pressure Range
- 12 - 26 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
ST09
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 38-3/4 in. / ST#2 = 38-3/4 in.
- Pop. Code
- C
Strap
Strainer 