Accumulator
or
Search Results
- Fuel
- BI-FUEL
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- R
- Eng. Desg.
- L31
Showing parts 1 to 25 out of 29.
0688947
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-5/16 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
1054617
with Block Type Fittings; Position: Front; Qty Req.: 1
Part Specifications
- Height
- 10-3/8 in.
- Width
- 11-1/8 in.
- Thickness
- 2-7/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 13/16 in. OD
- Outlet
- 3/8 in. OD
- Pop. Code
- D
Evaporator
Evaporator
7-4722
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 31-3/8 In.
- Width
- 17-3/8 In.
- Thickness
- 11/16 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- B
Condenser
93051
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-5/8 in.
- Width
- 7-1/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- D
Heavy duty heater
93052
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-5/8 in.
- Thickness
- 1-3/8 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heavy duty heater
C-594
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU2042
w/ 1-3/8 in. Thick Core; w/ Engine Oil Cooler; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 30-1/2 In.
- Width
- 17-1/4 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 18-11/16 In. x 2-3/8 In.
- Outlet Header
- 18-11/16 In. x 2-3/8 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-9/16 In.
- EOC
- Plated
- TOC
- Plated
- Pop. Code
- C
Automotive Radiator
CU2044
w/o EOC (Engine Oil Cooler); Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 30-1/2 In.
- Width
- 17-1/4 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 18-3/4 In. x 2-1/2 In.
- Outlet Header
- 18-3/4 In. x 2-1/2 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/8 In.
- TOC
- Plated
- Pop. Code
- C
Automotive Radiator
GMP02A
with 4 Quart Oil Pan; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 7.9375 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 3.8
- Pop. Code
- A
Oil Pan
GMP26A
with 5 Quart Oil Pan; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 8.125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.8
- Pop. Code
- B
Oil Pan
LO185
Fuel Pump Seal
Part Specifications
- Material
- Plastic / Polymer
- Outside Diameter
- 3-15/16
- Inside Diameter
- 3-3/4
- Pop. Code
- C
Lock Ring
LO91
with Steel Tank; with O-Ring; with 4.125in Sending Unit Hole
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4-13/16 in.
- Inside Diameter
- 4-5/16 in.
- Pop. Code
- A
Lock Ring
MA101
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- B
Mass Airflow Sensor
MA232
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- C
Mass Airflow Sensor
MP101
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5042
Position: Downstream Right; Qty Req.: 1 OR Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 16-1/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5044
GVW Under 8500 lbs; Position: Upstream Right; Qty Req.: 1 OR GVW Under 8500 lbs; Position: Upstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Oval
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 14-3/4 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10035
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Camshaft Position Sensor
S10107
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Crankshaft Position Sensor
SP3371M
Body Type: Standard Passenger Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; w/ 35 Gallons Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; w/ 35 Gallons Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; w/ 35 Gallons Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; w/ 35 Gallons Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
SP457M
Body Type: Standard Passenger Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 72-130 psi
- Flow Rate
- 48-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
SP6089M
Body Type: Standard Passenger Van; w/ 2 Electrical Connectors; w/ Fuel Fitting for Auxiliary Power Units; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; w/ 2 Electrical Connectors; w/ Fuel Fitting for Auxiliary Power Units; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; w/ 2 Electrical Connectors; w/ Fuel Fitting for Auxiliary Power Units; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; w/ 2 Electrical Connectors; w/ Fuel Fitting for Auxiliary Power Units; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 80-123 psi
- Flow Rate
- 46-56 gph
- Resistance
- 39-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- W
Fuel Module 
SP61072M
Body Type: Standard Passenger Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- D
Fuel Module 