Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- -
- Eng. Desg.
- CBFA
Showing parts 1 to 22 out of 22.
0610226
Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-1/2 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- A
Compressor
1010250
Part Specifications
- Height
- 9-1/16 in.
- Width
- 9-5/8 in.
- Thickness
- 1-7/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- D
Evaporator
4401-1107
Part Specifications
- Type
- Tube & Fin
- Height
- 24-3/16 In.
- Width
- 15-11/16 In.
- Thickness
- 1-1/4 In.
- Inlet
- 2-1/2 In.
- Outlet
- 2-1/2 In.
- Pop. Code
- C
Intercooler
7-3994
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 23-1/4 In.
- Width
- 17-7/8 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Condenser
98030
Denso Built
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6 in.
- Width
- 7-5/16 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Comments
- Requires the use of OEM pipes
- Pop. Code
- A
Heater
99384
Valeo Built
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/16 in.
- Width
- 7-1/8 in.
- Thickness
- 1-1/4 in.
- Inlet
- 1-1/16 in. Diameter
- Outlet
- 1-1/16 in. Diameter
- Kit
- O-Rings And Clamps
- Comments
- Includes O-Rings and Clamps
- Pop. Code
- B
Heater
C-713
Ignition Coil Mounts to Cylinder Head; Qty Req.: 4
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU13212
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 25-9/16 In.
- Width
- 17-9/16 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 18 In. x 2 In.
- Outlet Header
- 18 In. x 2 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- Pop. Code
- D
Automotive Radiator
Fuel Pump Driver Module 
FI1508
Part Specifications
- Description
- Fuel Injection Pump
- Fuel Type
- Gas
- Inlet
- 5/16
- Inlet Type
- Flare
- Outlet
- M14-1.5
- Outlet Type
- Threaded
- Pop. Code
- B
Fuel Injection Pump 
LO191
Part Specifications
- Material
- Polymer
- Outside Diameter
- 5-1/4 in.
- Inside Diameter
- 4-5/8 in.
- Pop. Code
- C
Lock Ring
MA296
Sensor Module with Housing
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 5
- Pop. Code
- C
Mass Airflow Sensor
OPA001
Steel Pan; w/ Oil Level Sensor Hole; Can Be Converted For w/o Oil Level Sensor Hole Applications; Requires Use Of Part Number : OPA001
Part Specifications
- Pop. Code
- C
Oil Pan
OS5511
Bank 1 Sensor 1; Located Before Starter Catalyst; w/ 5 Wires; Position: Upstream; Qty Req.: 1
Part Specifications
- Pop. Code
- W
Oxygen Sensor
OS6295
Located in Catalyst; Bank 1 Sensor 2; Position: Intermediate; Qty Req.: 1
Part Specifications
- Pop. Code
- W
Oxygen Sensor
S10389
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 2
- Terminal Shape
- Pin
- Pop. Code
- A
Crankshaft Position Sensor
SP5122M
Drive Type: FWD; Except Fuel-Fired Stationary Heater; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 5/16 in. Diameter
- Pressure Range
- 85-95 psi
- Flow Rate
- 60-70 gph
- Resistance
- 290-50 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST403
Drive Type: FWD
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 31 in. / ST#2 = 34-1/2 in. (2.0L, 3.6L)
- Pop. Code
- D
Strap
TB1024
Part Specifications
- Length
- 5-1/16 In.
- Width
- 4-7/8 In.
- Connector
- 6 Pin Male
- Inside Diameter
- 2-1/4 In. (57 mm)
- Pop. Code
- C
Electronic Throttle Body
VTS1194
Valve Only; At Oil Pan
Part Specifications
- Length
- 2-7/16 In.
- Width
- 1-1/4 In.
- Connector Quantity
- 1
- Connector Shape
- Ellipse
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Variable Valve Timing Solenoid
VWP24A
w/ or w/o Oil Level Sensor Hole; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 2.6875 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 6
- Pop. Code
- A
Oil Pan
