0233118
1st Design; without Evaporator Block Fitting
Part Specifications
- Material
- Aluminum
- Length
- 9 in.
- Diameter
- 3.5 in.
- Inlet
- 0.625 in.
- Pop. Code
- W
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- J
- Eng. Desg.
- L29
Showing parts 1 to 25 out of 27.
0283202
with Evaporator Block Fitting; 2nd Design
Part Specifications
- Material
- Aluminum
- Length
- 8.5 in.
- Diameter
- 3.5 in.
- Inlet
- 0.75 in.
- Pop. Code
- B
Accumulator
0688947
New; with Clutch; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 4.3307 In.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- C
Compressor
1054617
with Block Type Fittings; Position: Front; Qty Req.: 1
Part Specifications
- Height
- 10.375 In.
- Width
- 11.125 In.
- Thickness
- 2.875 In.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 0.8125 In. OD
- Outlet
- 0.375 In. OD
- Pop. Code
- W
Evaporator
Evaporator
7-4722
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 31.375 In.
- Width
- 17.375 In.
- Thickness
- 0.6875 In.
- Inlet Type
- Threaded
- Outlet Type
- Threaded
- Pop. Code
- C
Condenser
93051
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-5/8 in.
- Width
- 7-1/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- D
Heavy duty heater
93052
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-5/8 in.
- Thickness
- 1-3/8 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heavy duty heater
C-594
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
DC0703
Position: Rear; Qty Req.: 1
Part Specifications
- Material
- Steel
- Mounting Type
- 14 Bolt Holes
- Gaskets
- Not Included
- Pop. Code
- N
Differential Cover
FN691
Body Type: Standard Passenger Van OR Body Type: Standard Cargo Van OR Body Type: Extended Passenger Van OR Body Type: Extended Cargo Van
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2 in.
- Length
- 13 in.
- Vent Quantity
- 0
- Pop. Code
- B
Filler Neck
GMP41A
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 9.2126 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 6.7
- Pop. Code
- C
Oil Pan
LO185
Fuel Pump Seal
Part Specifications
- Material
- Plastic / Polymer
- Outside Diameter
- 3-15/16
- Inside Diameter
- 3-3/4
- Pop. Code
- C
Lock Ring
LO91
with O-Ring; without 35 Gallon Tank
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4.8125 In.
- Inside Diameter
- 4.3125 In.
- Pop. Code
- B
Lock Ring
MA101
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- B
Mass Airflow Sensor
MA232
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- C
Mass Airflow Sensor
MP101
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5042
Position: Downstream Right; Qty Req.: 1 OR Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 16-1/8 In.
- Thread
- M18x1.5
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10035
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Camshaft Position Sensor
S10107
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Crankshaft Position Sensor
SP3371M
Body Type: Standard Passenger Van; w/ 1 Electrical Connector; w/ Fuel Fitting For Auxiliary Power Units; w/ 35 Gallons Tank; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; Module has 1 Electrical Connector(s); with 35 Gallon Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; Module has 1 Electrical Connector(s); with 35 Gallon Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; Module has 1 Electrical Connector(s); with 35 Gallon Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- D
Fuel Module
SP457M
Body Type: Standard Passenger Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; w/o California Emissions; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 72-130 psi
- Flow Rate
- 48-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module
SP6159M
Body Type: Standard Passenger Van; w/ 2 Electrical Connectors; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Standard Cargo Van; w/ 2 Electrical Connectors; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Passenger Van; w/ 2 Electrical Connectors; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Extended Cargo Van; w/ 2 Electrical Connectors; w/o Fuel Fitting for Auxiliary Power Units; Wiring Harness Included; Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module
SP6175M
Body Type: Cutaway Van; w/ 1 Electrical Connector; w/o Fuel Fitting for Auxiliary Power Units; Except California Emissions; w/ 35 Gallon Tank; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 40-250 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- C
Fuel Module
TP0810
Transmission Mfr Code: 4L80-E; Transmission Control Type: Automatic
Part Specifications
- Material
- Steel
- Height
- 2.7500 In.
- Pop. Code
- B
Transmission Oil Pan
