Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- K
- Eng. Desg.
- -
Showing parts 1 to 25 out of 27.
Evaporator
1054598
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 11-7/16 in.
- Height
- 9.4375 In.
- Width
- 9-7/16 in.
- Width
- 11.4375 In.
- Thickness
- 2-15/16 in.
- Thickness
- 2.9375 In.
- Tank Material
- Aluminum
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Inlet
- 0.4375 In. OD
- Outlet
- 5/8 in. OD
- Outlet
- 0.625 In. OD
- Pop. Code
- B
Evaporator
7-4721
without Receiver Drier; with Pressure Switch Port
Part Specifications
- Type
- Parallel Flow
- Height
- 27.625 In.
- Width
- 16.1875 In.
- Thickness
- 0.875 In.
- Inlet Type
- Threaded
- Outlet Type
- Threaded
- Pop. Code
- A
Condenser
94483
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-1/2 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heavy duty heater
94764
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 6-3/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- W
Heater
C-611
Pack
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Female
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- B
Ignition Coil
CU1693
with 34in x 17.25in x 1.25in Core; w/ TOC (Transmission Oil Cooler); w/ EOC (Engine Oil Cooler); Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 34 In.
- Width
- 17.25 In.
- Thickness
- 1 In.
- Inlet Header
- 18.375 In.
- Outlet Header
- 18.375 In.
- Inlet
- 1.3125 In.
- Outlet
- 1.5625 In.
- EOC
- Plated
- TOC
- Plated
- Pop. Code
- A
Automotive Radiator
CU2315
with 34in Between Tanks; without Transmission Oil Cooler; with Engine Oil Cooler; with Standard Duty Cooling; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 34.0625 In.
- Width
- 16.875 In.
- Thickness
- 1 In.
- Inlet Header
- 18.4375 In.
- Outlet Header
- 18.4375 In.
- Inlet
- 1.3125 In.
- Outlet
- 1.5625 In.
- EOC
- Plated
- Pop. Code
- C
Automotive Radiator
DC0700
8.5 In. Ring Gear; 8.625 In. Ring Gear; Position: Rear; Qty Req.: 1
Part Specifications
- Pop. Code
- N
Differential Cover
Differential Cover
FG12N
Body Num Doors: 2; with Harness Code # VCF; VRX; VSH; VPD; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Tank Sending Unit
- Inlet
- Inverted Flare 5/16 in. Diameter
- Outlet
- Inverted Flare 3/8 in. Diameter
- Outlet nb.
- 1
- Wires
- 3
- Resistance
- 0-95
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO01
- Pop. Code
- B
Sending Unit
FN709
Body Num Doors: 4 OR Body Num Doors: 2
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2 in.
- Length
- 10 in.
- Vent 1
- 5/8 in.
- Vent Quantity
- 1
- Pop. Code
- A
Filler Neck
FNH012
Body Num Doors: 2
Part Specifications
- Overall Length
- 10-11/16 in.
- End 1 Inner Diameter
- 2 in.
- End 1 Outer Diameter
- 2-3/8 in.
- End 2 Inner Diameter
- 2 in.
- End 2 Outer Diameter
- 2-3/8 in.
- Pop. Code
- A
Filler Neck Hose
GM51A
Body Num Doors: 2; 30.5in x 24.75in x 14in
Part Specifications
- US Gallon
- 30
- Liter
- 117
- Length
- 30-1/2 in.
- Width
- 24-3/4 in.
- Height
- 14 in.
- Kit
- LO01 (Included)
- Strap Set
- ST121 (Not Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- A
Fuel Tank
GMP02A
with 4 Quart Oil Pan; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 7.9134 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 3.8
- Pop. Code
- A
Oil Pan
LO01
with Steel Tank; with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 3.875 In.
- Inside Diameter
- 3.125 In.
- Pop. Code
- A
Lock Ring
MP125
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- B
Manifold Absolute Pressure Sensor
OS5043
w/ 1 Electrical Connection; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Unheated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 1
- Overall Length
- 16-5/16 In.
- Thread
- M18x1.5
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1202
In Fuel Tank; For Pump Only - Both Strainers are Required; with Harness Code # TCA or TCE; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 42 - 51.1 gph
- Pressure Range
- 39.2 - 50.8 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- W
Fuel Pump
SP12N1H
Body Num Doors: 2; with Harness Code # VCF, VPD, VRX, or VSH; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Gas
- Inlet Type
- Inverted Flare, M14 x 1.5
- Outlet Type
- Inverted Flare - M16 x 1.5
- Pressure Range
- 15-25 psi
- Flow Rate
- 48-56 gph
- Resistance
- 0-95 Ohms
- Lock-Ring
- Included
- O-Ring
- Included
- Strainers
- Included
- Pop. Code
- B
Fuel Module
SP6028M
Body Num Doors: 4; with Fuel Pump Module Code TCA or TCE; Wiring Harness Included; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-131 psi
- Flow Rate
- 49-58 gph
- Resistance
- 0-95 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module
ST121
Body Num Doors: 2
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 37-1/4 In. / St#2 = 37-1/4 In.
- Pop. Code
- C
Strap
ST299
Body Num Doors: 4
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 26 In. / St#2 = 17 In.
- Pop. Code
- C
Strap
Strainer
