0210076
May Require Use Of Original Drier Plug
Part Specifications
- Length
- 9 in.
- Diameter
- 2 in.
- Pop. Code
- A
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- -
Showing parts 1 to 15 out of 15.
Evaporator
7-4945
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 18.4375 In.
- Width
- 13.6875 In.
- Thickness
- 0.6875 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
93081
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 4-15/16 in.
- Width
- 7-7/8 in.
- Thickness
- 3/4 in.
- Inlet
- 9/16 in. Diameter
- Outlet
- 9/16 in. Diameter
- Pop. Code
- C
Heater
C-634
Ignition Coil Mounts to Cylinder Head; Qty Req.: 4
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU2087
w/ 19.625 in. Between Top Mounting Holes; Inlet And Oulet On Left Side; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 16.75 In.
- Width
- 20.375 In.
- Thickness
- 1 In.
- Inlet Header
- 21.5625 In.
- Outlet Header
- 21.5625 In.
- Inlet
- 1.3125 In.
- Outlet
- 1.3125 In.
- TOC
- Concentric
- Pop. Code
- B
Automotive Radiator
FN705
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 8 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- B
Filler Neck
GM66A
Part Specifications
- US Gallon
- 17.4
- Liter
- 66
- Length
- 32-1/4 in.
- Width
- 20 in.
- Height
- 12-3/4 in.
- Kit
- LO-097 (2x), LO-S004, LO-S003
- Comments
- W/ Pan In Tank
- Pop. Code
- D
Fuel Tank
GMP51A
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 6.6929 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 5.2
- Pop. Code
- D
Oil Pan
LO97
Gasket And Screw Set For Fuel Cut-Off Valve
Part Specifications
- Material
- Polymer
- Outside Diameter
- 2-3/4 in.
- Inside Diameter
- 1-5/16 in.
- Comments
- Screws Included
- Pop. Code
- D
Lock Ring
MA183
Sensor Module with Housing
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- D
Mass Airflow Sensor
OS5206
w/ California Emissions; Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 26-9/16 In.
- Thread
- M18x1.5
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5207
w/ Federal Emissions; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 17-1/2 In.
- Thread
- M18x1.5
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
ST444
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 28-3/4 In. / St#2 = 28-3/4 In.
- Pop. Code
- C
Strap
Strainer
