Compressor
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- G
- Eng. Desg.
- ERC
Showing parts 1 to 19 out of 19.
1010256
with HFO-1234yf Refrigerant; Left Hand Drive; Position: Front; Qty Req.: 1
Part Specifications
- Height
- 12-1/16 in.
- Width
- 8-5/16 in.
- Thickness
- 1-7/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- B
Evaporator
1010302
Position: Rear; Qty Req.: 1
Part Specifications
- Height
- 5 in.
- Width
- 9-13/16 in.
- Thickness
- 1-3/4 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- D
Evaporator
7-3893
with Receiver Drier; with Transmission Oil Cooler
Part Specifications
- Type
- Parallel Flow
- Height
- 26-3/8 In.
- Width
- 20-9/16 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- A
Condenser
98189
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-1/8 in.
- Width
- 5-1/16 in.
- Thickness
- 13/16 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
99378
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 9-5/8 in.
- Width
- 7-3/8 in.
- Thickness
- 1 in.
- Inlet
- 1-1/8 in. Diameter
- Outlet
- 1-1/8 in. Diameter
- Kit
- O-Rings And Clamps
- Comments
- Includes O-Rings and Clamps
- Pop. Code
- B
Heater
C-989
Ignition Coil Mounts to Cylinder Head; Qty Req.: 6
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- D
Ignition Coil
CRP52A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 2.625 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 5.7
- Pop. Code
- A
Oil Pan
CU13656
w/ Standard Duty Cooling or Heavy Duty Cooling; w/ R-134A Refrigerant
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 25-1/16 In.
- Width
- 20-1/4 In.
- Thickness
- 7/8 In.
- Inlet Header
- 21-1/4 In. x 1-5/16 In.
- Outlet Header
- 21-1/4 In. x 1-5/16 In.
- Inlet
- 1-1/2 In.
- Outlet
- 1-1/2 In.
- Pop. Code
- C
Automotive Radiator
FG291A
Part Specifications
- Description
- Fuel Tank Sending Unit
- Wires
- 2
- Resistance
- 990-50
- Strainers
- Not Included
- Lock-Ring
- Not Included
- O-Ring
- Included
- Pop. Code
- D
Sending Unit 
LO186
Part Specifications
- Material
- Polymer
- Outside Diameter
- 3/16 in.
- Inside Diameter
- 5-1/4 in.
- Pop. Code
- A
Lock Ring
S10301
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- B
Crankshaft Position Sensor
S10356
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 4
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP7108M
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty; Position: Primary; Qty Req.: 1
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Flex / Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 55-61 psi
- Flow Rate
- 57-67 gph
- Resistance
- 990-50 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST489
No.1 Set
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 27-1/2 in / ST#2 = 27-1/2 in
- Pop. Code
- D
Strap
ST490
No.2 Set
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 31 in / ST#2 = 31 in
- Pop. Code
- D
Strap
TB1163
Part Specifications
- Length
- 5-7/16 In.
- Width
- 5-1/8 In.
- Connector
- 6 Pin Male
- Inside Diameter
- 2-15/16 In. (74 mm)
- Pop. Code
- A
Electronic Throttle Body
TP0850
Transmission Mfr Code: 850RE; Transmission Control Type: Automatic; Transmission Num Speeds: 8
Part Specifications
- Pop. Code
- N
Transmission Oil Pan
VTS1195
Position: Rear; Qty Req.: 1
Part Specifications
- Length
- 1-7/8 In.
- Width
- 1-7/16 In.
- Connector Quantity
- 1
- Connector Shape
- Ellipse
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Variable Valve Timing Solenoid
