Accumulator
or
Search Results
- Fuel
- DIESEL
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- F
- Eng. Desg.
- L65
Showing parts 1 to 17 out of 17.
0688947
New; with Clutch; w/ HT6 Compressor; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-5/16 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
Evaporator
7-4395
without Receiver Drier; Early Design
Part Specifications
- Type
- Parallel Flow
- Height
- 33-1/8 In.
- Width
- 13-15/16 In.
- Thickness
- 1-1/4 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- D
Condenser
7-4722
without Receiver Drier; Late Design
Part Specifications
- Type
- Parallel Flow
- Height
- 31-3/8 In.
- Width
- 17-3/8 In.
- Thickness
- 11/16 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- C
Condenser
93051
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-5/8 in.
- Width
- 7-1/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- D
Heavy duty heater
93052
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-5/8 in.
- Thickness
- 1-3/8 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heavy duty heater
CU2043
New Body Style
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 2
- Height
- 34 In.
- Width
- 17-1/4 In.
- Thickness
- 2-1/8 In.
- Inlet Header
- 18-1/2 In. x 3-1/4 In.
- Outlet Header
- 18-1/2 In. x 3-1/4 In.
- Inlet
- 1-13/16 In.
- Outlet
- 1-13/16 In.
- EOC
- Plated
- TOC
- Plated
- Pop. Code
- D
Automotive Radiator
FG17C
Part Specifications
- Description
- Fuel Tank Sending Unit
- Inlet
- Butt Flare 1/4 in. Diameter
- Outlet
- Butt Flare 3/8 in. Diameter
- Outlet nb.
- 1
- Wires
- 2
- Resistance
- 0-90
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO01
- Pop. Code
- D
Sending Unit Classic
FN697
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2 in.
- Length
- 13-1/2 in.
- Vent Quantity
- 0
- Pop. Code
- W
Filler Neck
GMP40B
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 9.125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 6.7
- Pop. Code
- D
Oil Pan
LO91
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4-13/16 in.
- Inside Diameter
- 4-5/16 in.
- Pop. Code
- B
Lock Ring
MA232
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- C
Mass Airflow Sensor
MP125
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- D
Manifold Absolute Pressure Sensor
SP1127
Frame Mounted; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Diesel/Gas
- Flow Rate
- 29.3 - 38.7 gph
- Pressure Range
- 5.5 - 9.4 psi
- Type
- Solenoid
- Inlet Type
- Threaded
- Inlet
- M16 x 1.5
- Outlet Type
- Threaded
- Outlet
- M16 x 1.5
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP6723M
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Diesel
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Resistance
- 1-90 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Not Included
- Pop. Code
- W
Fuel Module 
ST124
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 25-3/4 in. / ST#2 = 25-1/4 in.
- Pop. Code
- C
Strap
