Accumulator
or
Search Results
- Fuel
- DIESEL
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- F
- Eng. Desg.
- L65
Showing parts 1 to 19 out of 19.
0688950
New; with Clutch; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 5-3/16 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- C
Compressor
1054598
Position: Front; Qty Req.: 1
Part Specifications
- Height
- 11-7/16 in.
- Width
- 9-7/16 in.
- Thickness
- 2-15/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 7/16 in. OD
- Outlet
- 5/8 in. OD
- Pop. Code
- A
Evaporator
Evaporator
7-4721
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 27-5/8 In.
- Width
- 16-3/16 In.
- Thickness
- 7/8 In.
- Inlet Type
- Female Threaded
- Outlet Type
- Female Threaded
- Pop. Code
- A
Condenser
94483
Position: Front; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 7-1/2 in.
- Thickness
- 1-1/4 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heavy duty heater
94764
Position: Rear; Qty Req.: 1
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 8-1/4 in.
- Width
- 6-3/4 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heater
CU1523
w/o EOC (Engine Oil Cooler)
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 2
- Height
- 34-1/16 In.
- Width
- 19-7/16 In.
- Thickness
- 2-3/16 In.
- Inlet Header
- 20-11/16 In. x 3-3/16 In.
- Outlet Header
- 20-11/16 In. x 3-3/16 In.
- Inlet
- 1-13/16 In.
- Outlet
- 1-3/4 In.
- TOC
- Plated
- Pop. Code
- B
Automotive Radiator
DC0700
8.5 In. Ring Gear; 8.625 In. Ring Gear; Position: Rear; Qty Req.: 1
Part Specifications
- Pop. Code
- N
Differential Cover
Differential Cover
Fuel Pump Driver Module 
FG12V
Part Specifications
- Description
- Fuel Tank Sending Unit
- Inlet
- Inverted Flare 5/16 in. Diameter
- Outlet
- Inverted Flare 3/8 in. Diameter
- Outlet nb.
- 1
- Wires
- 2
- Resistance
- 0-95
- Strainers
- Included
- Lock-Ring
- Included
- O-Ring
- Included
- Kit
- LO01
- Pop. Code
- C
Sending Unit 
FN747
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Diesel
- Diameter
- 2 in.
- Length
- 10 in.
- Vent 1
- 5/8 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
GM43B
29.75in x 33.5in x 13.125in
Part Specifications
- US Gallon
- 42
- Liter
- 160
- Length
- 29-3/4 in.
- Width
- 33-1/2 in.
- Height
- 13-1/8 in.
- Kit
- LO01 (Included)
- Strap Set
- ST71 (Not Included)
- Pop. Code
- D
Fuel Tank
GMP40B
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 9.125 In.
- Drain Plug Thread
- M14 X 1.5
- Liter
- 6.7
- Pop. Code
- D
Oil Pan
LO01
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 3-7/8 in.
- Inside Diameter
- 3-1/8 in.
- Pop. Code
- A
Lock Ring
MP125
Part Specifications
- Material
- Plastic
- Connector Gender
- Female
- Connector Shape
- Oval
- Terminal Shape
- Bullet
- Terminal Count
- 3
- Pop. Code
- D
Manifold Absolute Pressure Sensor
SP1127
Frame Mounted; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 29-38.7 gph
- Pressure Range
- 5.5-9.4 psi
- Type
- Solenoid
- Inlet Type
- Threaded
- Inlet
- M16 x 1.5
- Outlet Type
- Threaded
- Outlet
- M16 x 1.5
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
ST71
Part Specifications
- Comments
- Includes 2 Straps; St#1 = 46-1/2 In. / St#2 = 46-1/2 In.
- Pop. Code
- B
Strap
