Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- 6
- Eng. Desg.
- EJ25D
Showing parts 1 to 17 out of 17.
Evaporator
7-3002
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 28-1/16 In.
- Width
- 13-3/4 In.
- Thickness
- 11/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- D
Condenser
93002
Core Only; Pipes And Seals Not Included; For Use With O.E. Pipes
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6 in.
- Width
- 7-1/2 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Comments
- Requires the use of OEM pipes
- Pop. Code
- C
Heavy duty heater
C-515
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- D
Ignition Coil
CU2152
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 26-3/8 In.
- Width
- 15-1/2 In.
- Thickness
- 5/8 In.
- Inlet Header
- 28-1/16 In. x 1-7/8 In.
- Outlet Header
- 28-1/16 In. x 1-7/8 In.
- Inlet
- 1-1/2 In.
- Outlet
- 1-1/2 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
FN1091
Type 1
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-11/16 in.
- Length
- 24-1/2 in.
- Vent 1
- 3/4 in.
- Vent 2
- 1/4 in.
- Vent Quantity
- 2
- Pop. Code
- W
Filler Neck
FN664
Shut-Off Valve Not Included; Type 2
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/2 in.
- Length
- 25-1/2 in.
- Vent 1
- 5/16 in.
- Vent 2
- 1/4 in.
- Vent 3
- 1/4 in.
- Vent Quantity
- 3
- Pop. Code
- B
Filler Neck
Filler Neck Accessory
FNH110
Part Specifications
- Overall Length
- 8-7/16 in.
- End 1 Inner Diameter
- 1-1/2 in.
- End 1 Outer Diameter
- 1-13/16 in.
- End 2 Inner Diameter
- 1-1/2 in.
- End 2 Outer Diameter
- 1-7/8 in.
- Pop. Code
- C
Filler Neck Hose
LO155
Part Specifications
- Material
- Polymer
- Outside Diameter
- 7-5/16 x 4-1/2 in.
- Inside Diameter
- 7-5/16 x 4-1/2 in.
- Pop. Code
- C
Lock Ring
Crankshaft Position Sensor
SP1118
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
ST363
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 36-1/4 in. / ST#2 = 36-3/4 in.
- Pop. Code
- D
Strap
STR84
Cylinder Head Type: DOHC
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- B
Strainer 
SU02A
Part Specifications
- US Gallon
- 15.9
- Liter
- 60
- Length
- 38-1/2 in.
- Width
- 24-1/2 in.
- Height
- 12-1/2 in.
- Kit
- LOSU01 ,LOSU02 ,LOSU03 ,2x LOSU04 (Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- C
Fuel Tank
SUP01A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 6.4375 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4
- Pop. Code
- D
Oil Pan
