0233066
Part Specifications
- Material
- Steel
- Length
- 7 in.
- Diameter
- 3.5 in.
- Inlet
- 0.625 in.
- Pop. Code
- C
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- A
- Eng. Desg.
- -
Showing parts 1 to 20 out of 20.
0658128
New; with Clutch; with Factory Installed A/C; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 5.5118 In.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- W
Compressor
0658581
New; with Clutch; with Dealer Installed A/C; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 4.685 In.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
Evaporator
7-4627
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 18.3125 In.
- Width
- 17.125 In.
- Thickness
- 0.8125 In.
- Inlet Type
- Quick-Connect
- Outlet Type
- Quick-Connect
- Pop. Code
- D
Condenser
94700
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/8 in.
- Width
- 5-7/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
C-506
Pack; Qty Req.: 2
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Ignition Coil
CU1062
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 17.9375 In.
- Width
- 18.125 In.
- Thickness
- 1 In.
- Inlet Header
- 18.25 In.
- Outlet Header
- 18.25 In.
- Inlet
- 1.4375 In.
- Outlet
- 1.5 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
DC0702
9.5 In. Ring Gear; Position: Rear; Qty Req.: 1
Part Specifications
- Material
- Steel
- Mounting Type
- 10 Bolt Holes
- Gaskets
- Not Included
- Pop. Code
- N
Differential Cover
DC0710
7.625 In. Ring Gear; Position: Rear; Qty Req.: 1
Part Specifications
- Material
- Steel
- Mounting Type
- 10 Bolt Holes
- Gaskets
- Not Included
- Pop. Code
- N
Differential Cover
FN518
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2-3/8 in.
- Length
- 25-3/4 in.
- Vent 1
- 1 in.
- Vent Quantity
- 1
- Pop. Code
- A
Filler Neck
FNH065
Part Specifications
- Overall Length
- 21-5/8 in.
- End 1 Inner Diameter
- 1-1/8 in.
- End 1 Outer Diameter
- 2-5/16 in.
- End 2 Inner Diameter
- 1-15/16 in.
- End 2 Outer Diameter
- 2-3/16 in.
- Pop. Code
- A
Filler Neck Hose
FP80A
Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Aluminum
- Height
- 7.1654 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 4.7
- Pop. Code
- D
Oil Pan
MA356
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 4
- Pop. Code
- B
Mass Airflow Sensor
S10246
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP1142
Body Type: Extended Cab Pickup; with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 45 - 54.2 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- D
Fuel Pump
SP1158
Body Type: Standard Cab Pickup; with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 45 - 54.2 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- D
Fuel Pump
ST137
Body Type: Standard Cab Pickup; Wheel Base: 108.0; with Plastic Tank; Bolts and Lock Washers Included
Part Specifications
- Comments
- Includes 3 Straps; St#1 = 26 In. / St#2 = 33 In. / St#3 = 34-3/4 In. Comes With Bolts
- Pop. Code
- C
Strap
ST138
Body Type: Extended Cab Pickup; Wheel Base: 125.0; with Plastic Tank; Bolts and Lock Washers Included
Part Specifications
- Comments
- Includes 3 Straps; St#1 = 26 In. / St#2 = 33-1/4 In. / St#3 = 34-3/4 In. Comes With Bolts
- Pop. Code
- C
Strap
Strainer
