Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- A
- Eng. Desg.
- -
Showing parts 1 to 19 out of 19.
0658128
New; with Clutch; with Factory Installed A/C; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 5-1/2 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
0658581
New; with Clutch; with Dealer Installed A/C; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-11/16 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
Evaporator
7-4627
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 18-5/16 In.
- Width
- 17-1/8 In.
- Thickness
- 13/16 In.
- Inlet Type
- Male Quick-Connect
- Outlet Type
- Male Quick-Connect
- Pop. Code
- D
Condenser
94700
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/8 in.
- Width
- 5-7/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
C-506
Pack; Qty Req.: 2
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU1062
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 17-15/16 In.
- Width
- 18-1/8 In.
- Thickness
- 1 In.
- Inlet Header
- 18-1/4 In. x 1-15/16 In.
- Outlet Header
- 18-1/4 In. x 1-15/16 In.
- Inlet
- 1-7/16 In.
- Outlet
- 1-1/2 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
FN518
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2-3/8 in.
- Length
- 25-3/4 in.
- Vent 1
- 1 in.
- Vent Quantity
- 1
- Pop. Code
- A
Filler Neck
FNH065
Part Specifications
- Overall Length
- 21-5/8 in.
- End 1 Inner Diameter
- 1-1/8 in.
- End 1 Outer Diameter
- 2-5/16 in.
- End 2 Inner Diameter
- 1-15/16 in.
- End 2 Outer Diameter
- 2-3/16 in.
- Pop. Code
- A
Filler Neck Hose
FP80A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 7.1875 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.7
- Pop. Code
- D
Oil Pan
MA356
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 4
- Pop. Code
- C
Mass Airflow Sensor
OS5037
w/ California Emissions; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 17-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10246
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP1142
Body Type: Extended Cab Pickup; with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
SP1158
Body Type: Standard Cab Pickup; with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
ST137
Body Type: Standard Cab Pickup; Wheel Base: 108.0; with Plastic Tank; Bolts and Lock Wash Included
Part Specifications
- Comments
- INCLUDES 3 STRAPS; ST#1 = 26 in. / ST#2 = 33 in. / ST#3 = 34-3/4 in. COMES WITH BOLTS
- Pop. Code
- C
Strap
ST138
Body Type: Extended Cab Pickup; Wheel Base: 125.0; with Plastic Tank; Bolts and Lock Wash Included
Part Specifications
- Comments
- INCLUDES 3 STRAPS; ST#1 = 26 in. / ST#2 = 33-1/4 in. / ST#3 = 34-3/4 in. COMES WITH BOLTS
- Pop. Code
- C
Strap
Strainer 