Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- C
- Eng. Desg.
- -
Showing parts 1 to 25 out of 25.
1010181
Part Specifications
- Height
- 10-15/16 in.
- Width
- 9-1/4 in.
- Thickness
- 2-3/8 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 9/16 in. OD
- Outlet
- 9/16 in. OD
- Pop. Code
- D
Evaporator
7-3381
with Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 27-3/8 In.
- Width
- 13-7/16 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Condenser
98054
To 01/23/2010
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-7/8 in.
- Width
- 9 in.
- Thickness
- 1 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heater
C-773
Ignition Coil Mounts to Cylinder Head; Qty Req.: 4
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- B
Ignition Coil
CU2831
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 25 In.
- Width
- 18-7/16 In.
- Thickness
- 5/8 In.
- Inlet Header
- 19-5/8 In. x 1-15/16 In.
- Outlet Header
- 19-5/8 In. x 1-15/16 In.
- Inlet
- 1-3/8 In.
- Outlet
- 1-3/8 In.
- TOC
- Concentric
- Pop. Code
- C
Automotive Radiator
FI1509
Part Specifications
- Description
- Fuel Injection Pump
- Fuel Type
- Gas
- Inlet
- 5/16
- Inlet Type
- Quick connect
- Outlet
- M14-1.5
- Outlet Type
- Threaded
- Pop. Code
- A
Fuel Injection Pump 
FN1065
with Federal Emissions System
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/8 in.
- Length
- 26-1/2 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
FN990
with California Emissions System
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1 in.
- Length
- 26-1/2 in.
- Vent 1
- 5/16 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
FNH255
Part Specifications
- Overall Length
- 8-9/16 in.
- End 1 Inner Diameter
- 1-5/16 in.
- End 1 Outer Diameter
- 1-5/8 in.
- End 2 Inner Diameter
- 1-1/16 in.
- End 2 Outer Diameter
- 1-3/8 in.
- Pop. Code
- N
Filler Neck Hose
HYP05B
with 22 Bolt Holes; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 4.3125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4
- Pop. Code
- A
Oil Pan
HYP23A
with 23 Bolt Holes; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 4.125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.7
- Pop. Code
- A
Oil Pan
Manifold Absolute Pressure Sensor
OS5557
w/ Federal Emissions; Bank 1 Sensor 2; Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Female
- Terminal Count
- 4
- Overall Length
- 23-5/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5564
w/ California Emissions; Bank 1 Sensor 2; Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 24-13/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS6171
Bank 1 Sensor 1; w/ Federal Emissions; w/ 5 Wires; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- AFR
- Connector Shape
- Rectangular / Oval
- Connector Gender
- Male
- Terminal Count
- 6
- Overall Length
- 19-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10230
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
SP1331
with 3/8 Lines; without California Emissions System; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 48 - 58 gph
- Pressure Range
- 94 - 131 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
SP3037M
Partial Zero Emissions Vehicle (PZEV); Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 5/16 in. Diameter
- Pressure Range
- 70-75 psi
- Flow Rate
- 49-58 gph
- Resistance
- 200-9 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
SP3038M
with Federal Emissions System; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 5/16 in. Diameter
- Pressure Range
- 55-61 psi
- Flow Rate
- 55-65 gph
- Resistance
- 200-8 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
SP3041M
with California Emissions System
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 5/16 in. Diameter
- Pressure Range
- 49-49 psi
- Flow Rate
- 40-50 gph
- Resistance
- 200-8 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included
- Pop. Code
- W
Fuel Module 
ST445
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 35-1/2 in. / ST#2 = 40-1/4 in.
- Pop. Code
- D
Strap
Strainer 
TB1175
Old Body Style
Part Specifications
- Length
- 5-15/16 In.
- Width
- 5-5/16 In.
- Connector
- 6 Pin Male
- Inside Diameter
- 2-3/8 In. (60 mm)
- Pop. Code
- D
Electronic Throttle Body
VTS1014
Position: Intake; Qty Req.: 1
Part Specifications
- Length
- 1-15/16 In.
- Width
- 1 In.
- Connector Quantity
- 1
- Connector Shape
- Rectangular
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Variable Valve Timing Solenoid
