Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- C
- Eng. Desg.
- 5EFE
Showing parts 1 to 13 out of 13.
7-4870
without Receiver Drier; with Dealer Installed A/C
Part Specifications
- Type
- Parallel Flow
- Height
- 21-1/2 In.
- Width
- 12 In.
- Thickness
- 1 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- W
Condenser
93035
with Standard Duty Cooling; with Heavy Duty Cooling
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-7/8 in.
- Width
- 4-7/8 in.
- Thickness
- 1 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Kit
- 2x Clamps
- Comments
- Requires the use of OEM pipes
- Pop. Code
- D
Heater
C-580
Ignition Coil Mounts to Cylinder Head; Qty Req.: 2
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- D
Ignition Coil
CU1750
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 12-3/4 In.
- Width
- 24-3/4 In.
- Thickness
- 1 In.
- Inlet Header
- 26-1/8 In. x 2 In.
- Outlet Header
- 26-1/8 In. x 2 In.
- Inlet
- 1-1/8 In.
- Outlet
- 1-1/8 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
FN527
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-3/8 in.
- Length
- 23-1/2 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
FNH057
Part Specifications
- Overall Length
- 15-1/4 in.
- End 1 Inner Diameter
- 1-5/16 in.
- End 1 Outer Diameter
- 1-3/4 in.
- End 2 Inner Diameter
- 1-5/16 in.
- End 2 Outer Diameter
- 1-3/4 in.
- Pop. Code
- C
Filler Neck Hose
LO107
Gasket And Screw Set For Fuel Pump Assembly
Part Specifications
- Material
- Polymer
- Outside Diameter
- 5-7/16 in.
- Inside Diameter
- 4-1/4 in.
- Comments
- Screws Included
- Pop. Code
- D
Lock Ring
LO34
Gasket And Screw Set For Air Vent
Part Specifications
- Material
- Polymer
- Outside Diameter
- 2-9/16 in.
- Inside Diameter
- 1-1/4 in.
- Comments
- Screws Included
- Pop. Code
- C
Lock Ring
SP1123
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 40.2 - 49.5 gph
- Pressure Range
- 94 - 116 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
STR46
Cylinder Head Type: DOHC
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- A
Strainer 
TO6B
37.375in x 18in x 9.375in
Part Specifications
- US Gallon
- 12
- Liter
- 45
- Length
- 37-3/8 in.
- Width
- 18 in.
- Height
- 9-3/8 in.
- Kit
- LO34, LO107 (Included)
- Comments
- W/ Pan In Tank
- Pop. Code
- D
Fuel Tank
TOP05A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 7.625 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 2.9
- Pop. Code
- D
Oil Pan
