0233094
Part Specifications
- Material
- Steel
- Length
- 8 in.
- Diameter
- 3.5 in.
- Inlet
- 0.625 in.
- Pop. Code
- W
Accumulator
Part Search
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- J
- Eng. Desg.
- -
Showing parts 1 to 13 out of 13.
0658130
New; with Clutch; with Factory Installed A/C; Replacement of Stretch Fit Belt Required
Part Specifications
- Pulley Diameter
- 4.3701 In.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
7-4404
without Receiver Drier
Part Specifications
- Type
- Tube Fin
- Height
- 21.1875 In.
- Width
- 14.25 In.
- Thickness
- 0.875 In.
- Inlet Type
- Quick-Connect
- Outlet Type
- Quick-Connect
- Pop. Code
- C
Condenser
94741
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-7/8 in.
- Width
- 6-1/2 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- C
Heater
C-506
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- A
Ignition Coil
CU1273
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 21.625 In.
- Width
- 17 In.
- Thickness
- 1 In.
- Inlet Header
- 17.125 In.
- Outlet Header
- 17.125 In.
- Inlet
- 1.375 In.
- Outlet
- 1.375 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
FNH055
Part Specifications
- Overall Length
- 9-13/16 in.
- End 1 Inner Diameter
- 1-13/16 in.
- End 1 Outer Diameter
- 1-7/8 in.
- End 2 Inner Diameter
- 1-13/16 in.
- End 2 Outer Diameter
- 2-3/16 in.
- Pop. Code
- B
Filler Neck Hose
LO04
Steel; Includes O-Ring; with 3.625 in I.D.
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4.6875 In.
- Inside Diameter
- 3.875 In.
- Pop. Code
- A
Lock Ring
MA356
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 4
- Pop. Code
- B
Mass Airflow Sensor
SP1172
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 31 - 40.2 gph
- Pressure Range
- 72.5 - 101.5 psi
- Type
- Gerotor
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- D
Fuel Pump
SP2151H
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 80-123 psi
- Flow Rate
- 42-51 gph
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- C
Fuel Module
Strap
Strainer
