Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- P
- Eng. Desg.
- -
Showing parts 1 to 22 out of 22.
0658130
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-3/8 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
Evaporator
7-4404
without Receiver Drier
Part Specifications
- Type
- Tube & Fin
- Height
- 21-3/16 In.
- Width
- 14-1/4 In.
- Thickness
- 7/8 In.
- Inlet Type
- Male Quick-Connect
- Outlet Type
- Female Quick-Connect
- Pop. Code
- C
Condenser
94741
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 5-7/8 in.
- Width
- 6-1/2 in.
- Thickness
- 2 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- B
Heater
C-506
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU1273
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 21-5/8 In.
- Width
- 17 In.
- Thickness
- 1 In.
- Inlet Header
- 17-1/8 In. x 1-7/8 In.
- Outlet Header
- 17-1/8 In. x 1-7/8 In.
- Inlet
- 1-3/8 In.
- Outlet
- 1-3/8 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
F58A
38in x 28in x 7in
Part Specifications
- US Gallon
- 12.7
- Liter
- 48
- Length
- 38 in.
- Width
- 28 in.
- Height
- 7 in.
- Kit
- LO13 (Included)
- Strap Set
- ST175 (Not Included)
- Pop. Code
- D
Fuel Tank
FN510
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas
- Diameter
- 1-1/8 in.
- Length
- 25 in.
- Vent 1
- 3/8 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FP78A
Transmission Control Type: Automatic; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 7.375 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 3.8
- Pop. Code
- D
Oil Pan
FP94A
Transmission Control Type: Manual; Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Aluminum
- Height
- 7.375 in
- Drain Plug Thread
- M12 X 1.75
- Liter
- 3.8
- Pop. Code
- W
Oil Pan
LO13
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 5-11/16 in.
- Inside Diameter
- 4-7/8 in.
- Pop. Code
- B
Lock Ring
MA196
Sensor Module with Housing
Part Specifications
- Material
- Aluminum
- Connector Gender
- Male
- Connector Shape
- Oval
- Terminal Shape
- Blade
- Terminal Count
- 4
- Pop. Code
- D
Mass Airflow Sensor
Mass Airflow Sensor
MP110
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- A
Manifold Absolute Pressure Sensor
OS5137
Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 24-3/4 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10101
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
SP1197
In Fuel Tank; For Pump Only - Both Strainers are Required; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 49.1 - 58.4 gph
- Pressure Range
- 79.8 - 123.3 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
SP2246M
Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 73-116 psi
- Flow Rate
- 40-42 gph
- Resistance
- 15-160 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
ST175
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 34-1/4 in. / ST#2 = 31-3/4 in.
- Pop. Code
- D
Strap
STR47
On Pump; When Replacing The Pump Only Both Strainers Are Required
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- C
Strainer 
STR48
On Module; When Replacing The Pump Only; Both Strainers Are Required
Part Specifications
- Material
- Depth media
- Micron Rating
- 50
- Pop. Code
- C
Strainer 