Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- A
- Eng. Desg.
- -
Showing parts 1 to 20 out of 20.
0658581
New; with Clutch; with Dealer Installed A/C; with Direct Mount; SD709 Compressor; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-11/16 in.
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- D
Compressor
Evaporator
94700
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/8 in.
- Width
- 5-7/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
C-506
Pack
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU1062
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 17-15/16 In.
- Width
- 18-1/8 In.
- Thickness
- 1 In.
- Inlet Header
- 18-1/4 In. x 1-15/16 In.
- Outlet Header
- 18-1/4 In. x 1-15/16 In.
- Inlet
- 1-7/16 In.
- Outlet
- 1-1/2 In.
- TOC
- Concentric
- Pop. Code
- D
Automotive Radiator
FG37A
Driver Side Mount
Part Specifications
- Description
- Fuel Tank Sending Unit
- Inlet
- Quick Connect 5/16 in. Diameter
- Outlet
- Quick Connect 3/8 in. Diameter
- Outlet nb.
- 1
- Wires
- 3
- Resistance
- 10-165
- Strainers
- Included
- Lock-Ring
- Not Included
- O-Ring
- Included
- Pop. Code
- C
Sending Unit 
FN547
Bed Length: 72.0
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2-3/8 in.
- Length
- 22-3/4 in.
- Vent 1
- 1 in.
- Vent Quantity
- 1
- Pop. Code
- B
Filler Neck
FN548
Bed Length: 84.0
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 2-3/8 in.
- Length
- 24-1/2 in.
- Vent 1
- 1 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
FNH066
Bed Length: 72.0
Part Specifications
- Overall Length
- 19-1/16 in.
- End 1 Inner Diameter
- 2-5/16 in.
- End 1 Outer Diameter
- 2-3/8 in.
- End 2 Inner Diameter
- 1-15/16 in.
- End 2 Outer Diameter
- 2-1/8 in.
- Pop. Code
- B
Filler Neck Hose
FNH067
Bed Length: 84.0
Part Specifications
- Overall Length
- 20-7/8 in.
- End 1 Inner Diameter
- 2-3/8 in.
- End 1 Outer Diameter
- 2-9/16 in.
- End 2 Inner Diameter
- 1-15/16 in.
- End 2 Outer Diameter
- 2-3/16 in.
- Pop. Code
- B
Filler Neck Hose
OS5037
w/ 4 Electrical Connections; Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 17-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
SP1142
Body Type: Extended Cab Pickup; with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
SP1158
Body Type: Standard Cab Pickup; with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 87 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
SP37A1H
Driver Side Mount
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Gas
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 87-116 psi
- Flow Rate
- 40-48 gph
- Resistance
- 10-165 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included
- Pop. Code
- B
Fuel Module 
ST136
Body Type: Standard Cab Pickup; Wheel Base: 114.0; with Plastic Tank; Bolts and Lock Wash Included
Part Specifications
- Comments
- INCLUDES 3 STRAPS; ST#1 = 26-1/2 in. / ST#2 = 33-1/4 in. / ST#3 = 31-1/4 in. COMES WITH BOLTS
- Pop. Code
- C
Strap
ST137
Body Type: Standard Cab Pickup; Wheel Base: 108.0; with Plastic Tank; Bolts and Lock Wash Included
Part Specifications
- Comments
- INCLUDES 3 STRAPS; ST#1 = 26 in. / ST#2 = 33 in. / ST#3 = 34-3/4 in. COMES WITH BOLTS
- Pop. Code
- C
Strap
ST138
Body Type: Extended Cab Pickup; Wheel Base: 125.0; with Plastic Tank; Bolts and Lock Wash Included
Part Specifications
- Comments
- INCLUDES 3 STRAPS; ST#1 = 26 in. / ST#2 = 33-1/4 in. / ST#3 = 34-3/4 in. COMES WITH BOLTS
- Pop. Code
- C
Strap
Strainer 
TP0831
Drive Type: 4WD; Transmission Mfr Code: A4LD; Transmission Control Type: Automatic
Part Specifications
- Pop. Code
- N
Transmission Oil Pan
