C-624
Pack
Part Specifications
- Ignition Type
- Standard
- Connector Gender
- Male
- Terminal Count
- 2
- Terminal Shape
- Threaded
- Pop. Code
- B
Ignition Coil
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- CARB
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- VG
Showing parts 1 to 15 out of 15.
CH107L
Position: Front Left; Qty Req.: 1
Part Specifications
- Description
- Front floor pan
- Dimensions
- W - 29 In. X L - 33 In.
- Specifications
- LH driver side
- Comments
- Floor pan may need slight alterations to fit some applications
- Pop. Code
- A
Body Panel
CH107R
Position: Front Right; Qty Req.: 1
Part Specifications
- Description
- Front floor pan
- Dimensions
- W - 29 In. X L - 33 In.
- Specifications
- RH passenger side
- Comments
- Floor pan may need slight alterations to fit some applications
- Pop. Code
- B
Body Panel
CH108L
Position: Rear Left; Qty Req.: 1
Part Specifications
- Description
- Rear floor pan
- Dimensions
- W - 29 3/8 In. X L - 29 In.
- Specifications
- LH driver side
- Comments
- Has a 1 In. overlap for ease of welding. when joining the front and rear floor pans, the 68-72 floor pans require slight alterations to fit.
- Pop. Code
- B
Body Panel
CH108R
Position: Rear Right; Qty Req.: 1
Part Specifications
- Description
- Rear floor pan
- Dimensions
- W - 29 3/8 In. X L - 29 In.
- Specifications
- RH passenger side
- Comments
- Has a 1 In. overlap for ease of welding. when joining the front and rear floor pans, the 68-72 floor pans require slight alterations to fit.
- Pop. Code
- B
Body Panel
CH126L
Left
Part Specifications
- Description
- Floor to firewall extension
- Dimensions
- W - 24 In. X L - 17 In.
- Specifications
- LH driver side
- Comments
- Mates to our floor pans and extends up the firewall area
- Pop. Code
- B
Body Panel
CH126R
Right
Part Specifications
- Description
- Floor to firewall extension
- Dimensions
- W - 24 In. X L - 17 In.
- Specifications
- RH passenger side
- Comments
- Mates to our floor pans and extends up the firewall area
- Pop. Code
- A
Body Panel
CU161
28-1/4 in. x 17-1/4 in. x 1-1/4 in. Core;; w/ 8-1/2 TOC (Transmission Oil Cooler; Center to Center); w/o EOC (Engine Oil Cooler); Replaces OEM 3 Rows Core; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 28-1/4 In.
- Width
- 17-1/4 In.
- Thickness
- 1 In.
- Inlet Header
- 18-11/16 In. x 2-3/8 In.
- Outlet Header
- 18-11/16 In. x 2-3/8 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-9/16 In.
- TOC
- Concentric
- Pop. Code
- A
Automotive Radiator
GM37G
37.25in x 30in x 6.75in; Tank Only; with Filler Neck; Not For Use w/ Fuel Injection Engines
Part Specifications
- US Gallon
- 20
- Liter
- 76
- Length
- 37-1/4 in.
- Width
- 30 in.
- Height
- 6-3/4 in.
- Kit
- LO02 (Included)
- Strap Set
- ST48 (Not Included)
- Comments
- W/ Filler Neck; W/ Two Rear Vent Pipes
- Pop. Code
- D
Classic Fuel Tank
GM37GFI
Tank & Pump; 37.25in x 30in x 6.75in; Use When Replacing Stock Engine w/ Late Model Engine w/ Fuel Injection
Part Specifications
- Length
- 37-1/4 in.
- Width
- 30 in.
- Height
- 6-3/4 in.
- US Gallon
- 20 gallons
- Liter
- 76 liters
- Lock-Ring
- Included
- O-Ring
- Included
- Fuel Module
- SP160A1H
- Strap Set
- ST48 (Not Included)
- Comments
- W/ Filler Neck; W/ Two Rear Vent Pipes
- Pop. Code
- W
Classic Injection Fuel Tank
GM37M
37.25in x 30in x 6.75in; without Filler Neck; Tank Only
Part Specifications
- US Gallon
- 20
- Liter
- 76
- Length
- 37-1/4 in.
- Width
- 30 in.
- Height
- 6-3/4 in.
- Kit
- LO02 (Included)
- Strap Set
- ST48 (Not Included)
- Comments
- W/ Filler Neck; W/ One Vent Pipe
- Pop. Code
- W
Classic Fuel Tank
LO02
with O-Ring
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 2-11/16 in.
- Inside Diameter
- 1-15/16 in.
- Pop. Code
- B
Lock Ring
SP1130
Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Diesel/Gas
- Flow Rate
- 55.7 - 65.0 gph
- Pressure Range
- 4 - 7 psi
- Type
- Rollervane
- Inlet Type
- Hose
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP160A1H
For Use When Converting To A Fuel Injection Tank Or Replacement In A Converted System; w/ In-Tank Stock-Capacity Fuel Pump
Part Specifications
- Description
- Fuel Pump and Sender Assembly
- Inlet
- Butt Flare 5/16 in. Diameter
- Outlet
- Inverted Flare
- Outlet nb.
- 1
- Resistance
- 0-96
- Flow Rate
- 50-58 gph
- Pressure Range
- 73-131 psi
- Strainers
- Included
- Lock-Ring
- Not Included
- O-Ring
- Included
- Pop. Code
- D
Sending Unit Classic
ST48
Galvanized Steel (Standard Replacement)
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 37-3/4 in. / ST#2 = 37-3/4 in.
- Pop. Code
- C
Strap
