Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- 3
- Eng. Desg.
- -
Showing parts 1 to 23 out of 23.
0658144
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Grooves
- 6
- Clutch Included
- Yes
- Pop. Code
- W
Compressor
7-4766
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 21-1/4 In.
- Width
- 15 In.
- Thickness
- 13/16 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- C
Condenser
94776
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/4 in.
- Width
- 6-1/8 in.
- Thickness
- 2 in.
- Inlet
- 3/4 in. Diameter
- Outlet
- 3/4 in. Diameter
- Pop. Code
- D
Heater
C-501
Pack; From 05/03/1999
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
C-506
Pack; To 05/02/1999
Part Specifications
- Ignition Type
- Distributorless
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- C
Ignition Coil
CU1719
Hoist May Be Required for Radiator Installation Underneath the Vehicle
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 24-3/8 In.
- Width
- 15-5/8 In.
- Thickness
- 1 In.
- Inlet Header
- 16 In. x 2 In.
- Outlet Header
- 16 In. x 2 In.
- Inlet
- 1-3/8 In.
- Outlet
- 1-3/8 In.
- TOC
- Plated
- Pop. Code
- D
Automotive Radiator
FN678
Built from 01/11/1999 to 05/02/1999
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 32 in.
- Vent 1
- 5/8 in.
- Vent Quantity
- 1
- Pop. Code
- W
Filler Neck
FN679
From 05/03/1999
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 32 in.
- Vent 1
- 1/4 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FN682
To 01/11/1999
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-7/16 in.
- Length
- 38 in.
- Vent 1
- 5/8 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
FP41A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 2.8125 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.3
- Pop. Code
- W
Oil Pan
LO175
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 5-13/16 in.
- Inside Diameter
- 5-5/16 in.
- Pop. Code
- D
Lock Ring
Mass Airflow Sensor
MA201
Sensor Only; From 05/03/1999
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 6
- Pop. Code
- C
Mass Airflow Sensor
OS5138
Position: Downstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Round
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 16-7/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5177
Position: Upstream; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 25-9/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
S10072
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Camshaft Position Sensor
S10260
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 2
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
SP1113
with Locating Tab; with 6in Flange; To 05/03/1999; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- A
Fuel Pump 
SP1145
From 05/03/1999; For Module w/ Metal Support Rods; Strainer Included; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 58.8 - 68.1 gph
- Pressure Range
- 80 - 123 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- Yes
- Strainers
- Yes
- Pop. Code
- B
Fuel Pump 
SP2227H
with 6in Flange; with Locating Tab
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Gas
- Inlet Type
- Push In - 5/16 in. Diameter
- Outlet Type
- Push In - 5/16 in. Diameter
- Pressure Range
- 80-123 psi
- Flow Rate
- 46-56 gph
- Resistance
- 15-155 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- D
Fuel Module 
SP8020M
From 05/03/1999; May Require Ford Tool Part # 310-133 For Proper Installation Of The Module Assembly; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Gas
- Outlet Type
- Quick Connect - 5/16 in. Diameter
- Pressure Range
- 80-116 psi
- Flow Rate
- 42-51 gph
- Resistance
- 15-150 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 
Strap
