Accumulator
or
Search Results
- Fuel
- DIESEL
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- L
- Eng. Desg.
- ETJ
Showing parts 1 to 18 out of 18.
0610176
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-13/16 in.
- Grooves
- 8
- Clutch Included
- Yes
- Pop. Code
- B
Compressor
1010083
Part Specifications
- Height
- 9-3/4 in.
- Width
- 8-7/8 in.
- Thickness
- 1-15/16 in.
- Tank Material
- Aluminum
- Core Material
- Aluminum
- Inlet
- 9/16 in. OD
- Outlet
- 11/16 in. OD
- Pop. Code
- C
Evaporator
4401-1302
Part Specifications
- Type
- Tube & Fin
- Height
- 27-1/2 In.
- Width
- 23-9/16 In.
- Thickness
- 2-1/4 In.
- Inlet
- 3 In.
- Outlet
- 3 In.
- Pop. Code
- A
Intercooler
7-3657
without Receiver Drier
Part Specifications
- Type
- Parallel Flow
- Height
- 24-3/16 In.
- Width
- 21-1/8 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- B
Condenser
98007
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 6-13/16 in.
- Width
- 7 in.
- Thickness
- 1 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heavy duty heater
CRP45A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 8.3125 in
- Drain Plug Thread
- M18 X 1.5
- Liter
- 11.4
- Pop. Code
- A
Oil Pan
CU2711
Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 27 In.
- Width
- 29-7/16 In.
- Thickness
- 1-1/4 In.
- Inlet Header
- 30-5/16 In. x 2-3/4 In.
- Outlet Header
- 30-5/16 In. x 2-3/4 In.
- Inlet
- 2 In.
- Outlet
- 2 In.
- Pop. Code
- A
Automotive Radiator
FN1012
Body Type: Cab & Chassis - Crew Cab
Part Specifications
- Cup Type
- Quick-On
- Fuel Type
- Gas/Diesel
- Diameter
- 1-1/2 in.
- Length
- 6-5/16 in.
- Vent 1
- 3/4 in.
- Vent Quantity
- 1
- Pop. Code
- C
Filler Neck
FNH273
Body Type: Cab & Chassis - Crew Cab
Part Specifications
- Overall Length
- 12-5/8 in.
- End 1 Inner Diameter
- 1-1/2 in.
- End 1 Outer Diameter
- 1-11/16 in.
- End 2 Inner Diameter
- 1-1/2 in.
- End 2 Outer Diameter
- 1-5/8 in.
- Pop. Code
- N
Filler Neck Hose
LO164
without O-Ring
Part Specifications
- Material
- Steel
- Outside Diameter
- 7-3/8 in.
- Inside Diameter
- 4-15/16 in.
- Pop. Code
- A
Lock Ring
LO186
Part Specifications
- Material
- Polymer
- Outside Diameter
- 3/16 in.
- Inside Diameter
- 5-1/4 in.
- Pop. Code
- A
Lock Ring
MA340
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 4
- Pop. Code
- B
Mass Airflow Sensor
Manifold Absolute Pressure Sensor
Manifold Absolute Pressure Sensor
S10201
Part Specifications
- Connector Gender
- Male
- Connector Shape
- Square
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- W
Crankshaft Position Sensor
SP7094M
Body Type: Cab & Chassis - Crew Cab; with Aft Axle Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Cab & Chassis - Conventional; with Aft Axle Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Diesel
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 16-23 psi
- Flow Rate
- 65-80 gph
- Resistance
- 220-20 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- A
Fuel Module 
SP7212M
Body Type: Cab & Chassis - Crew Cab; with Midship Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty OR Body Type: Cab & Chassis - Conventional; with Midship Tank; Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty
Part Specifications
- Description
- Fuel Pump Module Assembly
- Fuel Type
- Diesel
- Inlet Type
- Quick Connect - 5/16 in. Diameter
- Outlet Type
- Quick Connect - 3/8 in. Diameter
- Pressure Range
- 16-23 psi
- Flow Rate
- 65-80 gph
- Resistance
- 220-20 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included, Mounted Internally
- Pop. Code
- B
Fuel Module 