Accumulator
Part Search
or
Search Results
- Fuel
- DIESEL
- Fuel Delivery
- FI
- ASP.
- T
- Eng. VIN
- T
- Eng. Desg.
- -
Showing parts 1 to 13 out of 13.
Accumulator
Evaporator
94700
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 7-3/8 in.
- Width
- 5-7/16 in.
- Thickness
- 1-1/4 in.
- Inlet
- 5/8 in. Diameter
- Outlet
- 5/8 in. Diameter
- Pop. Code
- A
Heater
DC0710
with 9.25 In. Chrysler Rear Axle; Position: Rear; Qty Req.: 1
Part Specifications
- Pop. Code
- N
Differential Cover
F10B
29.25in x 24.625in x 13.875in
Part Specifications
- US Gallon
- 23
- Liter
- 87
- Length
- 29-1/4 in.
- Width
- 24-5/8 in.
- Height
- 13-7/8 in.
- Kit
- LO04 (Included)
- Strap Set
- ST28 (Not Included)
- Comments
- Large Gauge Hole 3 5/8 "
- Pop. Code
- A
Classic Fuel Tank
FP08A
without Sensor Hole; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 6.1811 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 4.8
- Pop. Code
- D
Oil Pan
FP08B
with Sensor Hole; Failure to use the vehicle OEM approved sealing method will void the warranty.; Gasket And/Or Sealant Not Included
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 6.1811 In.
- Drain Plug Thread
- M14 - 1.5
- Liter
- 4.8
- Pop. Code
- D
Oil Pan
LO04
Steel; Includes O-Ring; with 3.625 in I.D.
Part Specifications
- Material
- Steel / Polymer
- Outside Diameter
- 4.6875 In.
- Inside Diameter
- 3.875 In.
- Pop. Code
- A
Lock Ring
SP1121
Externally Mounted; High Pressure Pump; 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 51 - 60.3 gph
- Pressure Range
- 116 - 159.5 psi
- Type
- Rollervane
- Inlet Type
- Quick Connect
- Outlet Type
- Quick Connect
- Voltage
- 12.0
- Gaskets
- No
- Strainers
- No
- Pop. Code
- B
Fuel Pump
SP1167
In-Tank High Pressure Pump; 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electric Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 28 - 40 gph
- Pressure Range
- 3.6 - 7.2 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12.0
- Gaskets
- Yes
- Strainers
- No
- Pop. Code
- D
Fuel Pump
Strap
TP0831
Drive Type: 4WD; Transmission Mfr Code: A4LD; Transmission Control Type: Automatic
Part Specifications
- Material
- Steel
- Pop. Code
- N
Transmission Oil Pan
